Abstract:Aims: This work is to give a further insight into the residual stress distribution within APS TBC system within TBC system by coupled thermo-mechanic finite element analysis. Background: Thermal barrier coatings is a typical example of ceramic-metal system. Thermal stress could be produced in the thermal barrier coatings on account of the difference in coefficient of thermal expansion between the ceramic and metal, and poses a serious threat to the performance and lifetime of the thermal barrier coatings. Objective: Many previous studies used out-of-plane stresses to estimate the delamination of the bond-coat/TGO and TGO/top-coat interfaces. However, in the present work, normal and tangential stresses under thermal-mechanic coupling analysis are adopted to investigate the interface delamination. Method: A thermo-mechanic coupled model comprised of a top-coat, thermally grown oxide, bond-coat, and substrate, is built for the stress evolution within the thermal barrier coatings using finite element method. The thermal conduction is carried out inside the thermal barrier coating model according to Fourier's law, with the temperature gradient forming in the model. Discussion: The thermo-mechanic coupled model is employed to analyze the top-coat stress, bond-coat plastic strain and interface stress. Simultaneously, a parametric study is performed on the effect of thermally grown oxide thickness and substrate surface heat transfer coefficient on the above mechanical responses. Results: The top-coat is subjected to tensile stresses around the peak, with the stress magnitudes decreasing with the oxide thickness. Normal tension acts across the oxide/bond-coat interface around the peak while normal compression acts around the valley. Their magnitudes are dependent on the oxide thickness but are not so sensitive to the substrate surface heat transfer coefficient. Conclusions: The TC/TGO interface might be subjected to tensile or compressive stresses around the peak, which depends on the TGO thickness. The TGO/BC interface is subjected to tensile stresses around the peak and compressive stresses around the valley, the magnitudes of which increase with the TGO thickness. The influence of substrate film coefficient on the stress across the TGO/BC interface is not so significant.

The Influence of Bondcoat and Topcoat Mechanical Properties on Stress Development in Thermal Barrier Coating Systems

Effects of breakaway oxidation on local stresses in thermal barrier coatings

The Thermally Grown Oxide Thickness and Substrate Film Coefficient Effect on Residual Stresses within Thermal Barrier System

Effect of Top-Coat Thickness and Interface Fluctuation on the Residual Stress in APS-TBCs

Stress States in Plasma-Sprayed Thermal Barrier Coatings Upon Temperature Cycling: Combined Effects of Creep, Plastic Deformation, and TGO Growth

Effect of Material Properties on Residual Stress Distribution in Thermal Barrier Coatings

Effects of oxide thickness, Al2O3 interlayer and interface asperity on residual stresses in thermal barrier coatings

Influences of Interface Morphology and Thermally Grown Oxide Thickness on Residual Stress Distribution in Thermal Barrier Coating System

Evolution of Residual Stresses in PS-PVD Thermal Barrier Coatings on Thermal Cycling

Stress Development in Thermal Barrier Coatings with Morphology-Controlled Thermally Grown Oxide

Effect of Thermal Growth Oxide Composition and Morphology on Local Stresses in Thermal Barrier Coatings

Finite Element Analysis of Stresses and Interface Crack in Tbc Systems

Residual Stress Distribution along Interfaces in Thermal Barrier Coating System under Thermal Cycles

Effects of Interface Roughness on Residual Stress Distribution and Crack Nucleation and Propagation in Thermal Barrier Coatings

The Sintering and Creep and Cracking of Thermal Barrier Coatings under Thermal Cycling

Experimental and computational study on hot fatigue process of thermal barrier coatings by EB-PVD

Dynamic Evolution of Nonuniform Temperature-Stress Distributions in Continuously Eroding Thermal Barrier Coatings

Numerical study of residual stresses in environmental barrier coatings with random rough geometry interfaces

Study on Stress Development in the Phase Transition Layer of Thermal Barrier Coatings

Effects of Residual Stress on the Mechanical Properties of Plasma-Sprayed Thermal Barrier Coatings

Influence of “Island-Like” Oxides in the Bond-Coat on the Stress and Failure Patterns of the Thermal-Barrier Coatings Fabricated by Atmospheric Plasma Spraying During Long-Term High Temperature Oxidation