Abstract:The earthquake forces used in design codes of buildings should be theoretical determinable. This work examines the seismic force modification factorR based on elastic-plastic time-history earthquake analysis of SDOF systems, wherein the hysteresis models are elastic-perfectly-plastic (EPP), elastic-linearly-hardening (ELH), shear-slipped and bilinear-elastic. The latter two models are analysed for separating the effect of the ductility and the energy-dissipating capacity. Three-hundred eighty-eight earthquake records from different site conditions are used in analysis. The ductility is taken to be 2, 3, 4, 5 and 6, with the damping ratio being 0.02, 0.035 and 0.05 respectively. The post-yield stiffness ratios 0.0, 0.1 and 0.2 are used in the analysis. TheR spectra are standardized by the characteristic period of the earthquake records, which leads to a much smaller scatter in averaged numerical results. It was found that the most important factor determiningR is the ductility.R increases more than linearly with ductility. The energy-dissipating capacity, damping and the post-yield stiffness are the less important factors. The energy dissipating capacity is important only for structures with short period and moderate period (0.3≤T/T g <5.0). For EPP and ELH models,R for 0.05 damping is 10% to 15% smaller than for 0.02 damping. For EPP and ELH models, greater post-yield stiffness leads to greaterR, but the influence of post-yield stiffness is obvious only when the post-yield stiffness is less than 10% of the initial stiffness. By means of statistical regression analysis the relation of the seismic force modification factorR with the natural period of the system and ductility for EPP and ELH models were established for each site and soil condition.

The Modification of Strength Reduction Factors for MDOF Effect

Spectra of Seismic Force Reduction Factors of MDOF Systems Normalized by Two Characteristic Periods

Seismic Force Modification Factor for Ductile Structures

Dynamic P-△ Effects on Seismic Force Modification Factors

Seismic Force Modification Factors for Modified-Clough Hysteretic Model

SEISMIC-FORCE-MODIFICATION FACTOR FOR STRUCTURES WITH BILINEAR ELASTOPLASTIC MODEL

SEISMIC FORCE MODIFICATION FACTORS FOR STRUCTURES WITH SHEAR-SLIP HYSTERETIC MODEL

Static and dynamic inelastic P -Δ effect for seismic design

Seismic-design-oriented Classification of Structures and Members and Structure Influence Coefficient

Curvature Ductility-Based Seismic Force Reduction Factor of Flexure-Type Structure

Inelastic Displacement Amplification Factor for Ductile Structures with Constant Strength Reduction Factor

Composition of Structural Behavior Factors in Codes of China, Japan,Europe and USA for Earthquake-Resistance and Their Corresponding Ductility Demands

Seismic Force with Different Ductility Factor in Strength Degrading System

A Modification of Column Strength Reduction Factors

Determining Experimental Ductile Behavior of Composite Walls Considering Second-Order Effects: A Case Study for Multi-Celled CFST Walls

Seismic design of rectangular/square columns in SDOF systems based on their damage performance

An efficient framework for structural seismic collapse capacity assessment based on an equivalent SDOF system

Damping modification factor based on random vibration theory using a source-based ground-motion model

Factors Influencing Maximum and Residual Deformations of SDOF Systems Subjected to Large Ground Motions

Probability-based analytical model for predicting the post-earthquake residual deformation of SDOF systems

Seismic reduction factors for equivalent static design of braced frames: Tao Wang Mikiko Kato