Abstract:Carbon nanotube (CNT) fiber is a promising material due to its extensive potential in micro/nanoelectronics, where the thermal performance is of great importance. In this work, a well-developed steady-state electro-Raman-thermal technique is employed and extended to the ambient environment for measuring thermal conductivity of the CNTs fiber. In this technique, two ends of the CNT fiber are attached to heat sinks and a steady electrical current flows in a sample to induce Joule heating. The heat dissipates to the ambient air and goes through the sample to the heat sinks. With combined effects of natural heat convection and heat conduction, a steady temperature profile along the sample can be established. The middle point temperature of the fiber is probed by measuring the local Raman spectrum. It is because the Raman scattering (such as G peak) of CNT fiber is temperature dependent and thus it can be used as a temperature indicator for thermal property measurement. In calibration experiment, the temperature coefficient of the G peak of CNT fiber is first obtained. A modified one-dimensional heat conduction solution involving free convection effect is derived as #br#T(x) =((I2R)/(hLS))(1 -(e√(hS)/(kAc)x)+e-√(hS)/((kAc)x)/(e√(hS)/(kAc)L/2)+e-√(hS)/(kAc)L/2))+ T0. It can be found that the relationship between middle point temperature (T0) and applied Joule heating power (I2R) can be used to extract the thermal conductivity of the material (k) as long as the convection coefficient (h) is available. In this work, the convection coefficient is calculated by the model established by Peirs et al. The thermal conductivity of CNT fiber synthesized from floating catalyst method is measured to be 66.93 W/(m·K)± 11.49 W/(m·K). This value is a little bit larger than that of other CNT fibers synthesized by the acid spun method or the dry-spinning method, which can be explained by the different sample structures induced from different synthesize method. This value is two orders of magnitude smaller than that of individual carbon nanotube, and two orders of magnitude larger than that of CNTs packed bed, showing that heat conduction in CNT based bulk material is determined mainly by a large number of thermal interfaces between CNTs contacts rather than the intrinsic thermal property of CNT.

Thermal diffusivity and conductivity of multiwalled carbon nanotube arrays

Thermal Conductivity Of Configurable Two-Dimensional Carbon Nanotube Architecture And Strain Modulation

Electrothermal Characterization of Single-Walled Carbon Nanotube (SWCNT) Interconnect Arrays

Raman measurement of heat transfer in suspended individual carbon nanotube

Experimental Reconstruction of Thermal Parameters in CNT Array Multilayer Structure

Measuring Thermal Conductivity of an Individual Carbon Nanotube Using Raman Spectroscopy

Differential Multi-probe Thermal Transport Measurements of Multi-walled Carbon Nanotubes grown by Chemical Vapor Deposition

Thermal conductivity characterization of three dimensional carbon nanotube network using freestanding sensor-based 3ω technique

Thermal Characterization of Carbon Nanotube Fiber by Time-Domain Differential Raman

Thermal conductivity of carbon nanotube networks: a review

Infrared Microscopy Thermal Characterization of Opposing Carbon Nanotube Arrays

Parametric Study of Intrinsic Thermal Transport in Vertically Aligned Multi-Walled Carbon Nanotubes Using a Laser Flash Technique

Thermal Characterization of Carbon Nanotube Fibers Based on Steady-State Electro-Raman-Thermal Technique

Measurements of Thermal Conductivity of Individual Carbon Nanotubes

Transient Thermo-Reflectance Method for Characterization of Thermal Interface Material Based on Carbon Nanotube Array

Thermophysical Properties of Multi-Wall Carbon Nanotube Bundles at Elevated Temperatures Up to 830 K

Thermal Performance of Vertically-Aligned Multi-Walled Carbon Nanotube Array Grown on Platinum Film

THERMAL CHARACTERIZATION OF MULTI-WALL CARBON NANOTUBE BUNDLES BASED ON PULSED LASER-ASSISTED THERMAL RELAXATION

Thermal properties of metal-coated vertically aligned single-wall nanotube arrays

Dense Vertically Aligned Multiwalled Carbon Nanotube Arrays As Thermal Interface Materials

Quantitative Thermal Imaging of Single-Walled Carbon Nanotube Devices by Scanning Joule Expansion Microscopy.