Abstract:To improve the structure and hard elasticity of poly(vinylidene fluoride) (PVDF) fibers, a small amount of the plasticizer dibutyl phthalate (DBP) was added to PVDF. The PVDF/DBP blend fibers were prepared by melt spinning and subsequent annealing. The crystalline structure and thermal properties of the blend fibers were analyzed in terms of the long-period lamellar spacing, crystal structure, and degree of crystallinity with X-ray diffraction, differential scanning calorimetry, and small-angle X-ray scattering. The results indicated that stacked crystalline lamellae, which were aligned normal to the fiber axis, existed in the blend fibers, and they were in the form of an alpha-crystal phase. The total crystallinity of the blend fibers was higher than that of the pure PVDF fibers, and it reached its highest value when the DBP concentration was 2 wt %; then, it decreased with an increase in the DBP content. The morphology and mechanical properties of the fibers were also investigated with scanning electron microscopy and electronic tensile experimentation. The results of scanning electron microscopy apparently exhibited a small porous structure on the surface of the blend fibers, and the more DBP there was in the PVDF fibers, the more porous structure was obtained. Mechanical experiments indicated that the fibers with a 5 wt % concentration of DBP had better elastic recovery and breaking strain than the pure PVDF fibers. These results all indicated that DBP-modified PVDF fibers have potential applications in preparing microporous membranes by a melt spinning and stretching process. (C) 2009 Wiley Periodicals, Inc. J Appl Polym Sci 114: 3645-3651, 2009

Improvement of HDPE Extrusion Properties by Fluorocarbon Elastomers Additives

Biobased Poly(ethylene-co-hexamethylene 2,5-Furandicarboxylate) (PEHF) Copolyesters with Superior Tensile Properties

Synthesis, characterization and lubricating effect of long chain branched polydimethylsiloxane-g-polyethylene copolymers

Improving Hydrophilicity And Protein Resistance Of Poly(Vinylidene Fluoride) Membranes By Blending With Amphiphilic Hyperbranched-Star Polymer

Plasticizer Effect of Dibutyl Phthalate on the Morphology and Mechanical Properties of Hard Elastic Poly(Vinylidene Fluoride) Fibers

Study on the fusion properties of extruded foaming rigid PVC

Porous membranes modified by hyperbranched polymers II.Effect of the arm length of amphiphilic hyperbranched-star polymers on the hydrophilicity and protein resistance of poly(vinylidene fluoride) membranes

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

Optimizing high-density polyethylene (HDPE) performance: utilizing diatomaceous earth filler and an innovative reversible crosslinking reaction agent (RXR)

Study on Crystallization Kinetics of Partially Melting Polyethylene Aiming to Improve Mechanical Properties

In-Situ Bubble Stretching Assisted Melt Extrusion for the Preparation of HDPE/UHMWPE/CF Composites

Preparation of High Performance Fluoroelastomers by Modifying Carbon Fiber with PEI and Fluorinated Coupling Agent

High-Temperature Tribological Behavior of HDPE Composites Reinforced by Short Carbon Fiber under Water-Lubricated Conditions

Improving Environmental Stress Cracking Resistance of High‐Density Polyethylene Grades by Comonomer Addition and Nanocomposite Approach

Dynamic Mechanical Properties and Morphology of High‐density Polyethylene/caco3 Blends with and Without an Impact Modifier

Blending Recycled High-Density Polyethylene HDPE (rHDPE) with Virgin (vHDPE) as an Effective Approach to Improve the Mechanical Properties

Physical and Thermal Properties of High-Density Polyethylene Film Modified with Polypropylene and Linear Low-Density Polyethylene

Modified high-density polyethylene films: preparation, composition and their physical properties

MORPHOLOGICAL EVOLUTION AND VISCOELASTIC BEHAVIOR OF COMPATIBILIZED HDPE/PA6 BLENDS

Influence of hydrogenated petroleum resin on the crystallization behavior of polyethylene for biaxially stretched films

Reinforcing High-Density Polyethylene by Polyacrylonitrile Fibers