Abstract:The introduction of the conjugated group bisphenol fluorene effectively improves the dispersion of multiwalled carbon nanotubes (MWCNT) in in situ polymerization and increases the interfacial bonding strength. The reduction of interfacial thermal resistance significantly enhances the thermal conductivity of the nanocomposite. Instead of pure resin, this copolymerized nanocomposite is used to prepare high thermal conductivity and high strength poly (ether ether ketone) (PEEK) composites. Nanofiller reinforcement is an effective method to prepare high thermally conductive polymer‐matrix composites. However, the poor dispersion of nanofillers and high interfacial thermal resistance between the filler and matrix seriously affect the thermal conductivity and mechanical properties of composites. To solve this problem, a small amount of conjugated fluorene group is introduced into the polymer chain of poly (ether ether ketone) (PEEK) to afford the fluorene‐functionalized copolymer matrix (FD‐PEEK). In an in situ polymerization procedure, the matrix non‐covalently binds to multi‐walled carbon nanotubes (MWCNT) to allow highly filled PEEK/MWCNT nanocomposites. With the filler dispersion and matrix–filler interfacial bonding improved, the prepared nanocomposites possess both high thermal conductivity and tensile strength. At the optimal ratio of 2 mol% fluorene groups in the polymer chain, the nanocomposite with 10 wt% MWCNT exhibits an excellent thermal conductivity of 2.41 W m−1 K−1, which is 868% higher than pristine PEEK, with tensile strength remaining 104.3 MPa. The PEEK/MWCNT nanocomposites can be further used as matrix resins to build double‐segregated network multi‐component composites, which contributes to an innovative strategy to design high‐performance thermally conductive materials.

Preparation of High Performance Fluoroelastomers by Modifying Carbon Fiber with PEI and Fluorinated Coupling Agent

Preparation and Modification of High-Performance Polychlorotrifluoroethylene Through Physical Blending

Synthesis and characterization of fluorine-containing polyester based on phthalic anhydride and tetrafluoropropyl glycidyl ether

Enhanced Interfacial Strength of Carbon Fiber/peek Composites Using a Facile Approach Via PEI&ZIF-67 Synergistic Modification

Preparationof Self‐emulsifying Waterborne Polyamide‐imide Sizing for Carbon Fiber and Improvement on Mechanical Performances of Carbon Fiber Reinforced Thermoplastic Polymer

Interfacial performance and build orientation of 3D‐printed poly(ether‐ketone‐ketone) reinforced by continuous carbon fiber

A Novel Surface Modification of Carbon Fiber for High-Performance Thermoplastic Polyurethane Composites

The Optimization of Process Parameters and Characterization of High-Performance CF/PEEK Composites Prepared by Flexible CF/PEEK Plain Weave Fabrics

Surface Modification of Carbon Fibers by Grafting PEEK-NH2 for Improving Interfacial Adhesion with Polyetheretherketone

Epoxy Laminated Composites Reinforced with Polyethyleneimine Functionalized Carbon Fiber Fabric: Mechanical and Thermal Properties

Effect of surface functionalization on the surface and inter-facial properties of thermoplastic-coated carbon fibers

High-performance carbon fiber-reinforced epoxy resin composites based on novel, environmentally friendly, stability, and heat-moisture resistant nano emulsion encapsulated POSS sizing agent interface modification

A "sizing-free" strategy to improve the interfacial property of PEEK/CF composites based on "grafting-bridging" bifunctional diazonium salt

Improving thermal, electrical and mechanical properties of fluoroelastomer/amino-functionalized multi-walled carbon nanotube composites by constructing dual crosslinking networks

Improving the Interfacial Adhesion of Long Carbon Fiber-Reinforced Polyamide 6 Composites by Electrochemical Oxidation and Polyethylenimine-Carboxymethyl Cellulose Grafting

Synergistically Improving the Thermal Conductivity and Mechanical Strength of PEEK/MWCNT Nanocomposites by Functionalizing the Matrix with Fluorene Groups

Preparation of self‐emulsifying waterborne polyamide‐imide sizing for carbon fiber and improvement on mechanical performances of carbon fiber reinforced thermoplastic polymer

Establishing interphase with "rigid-flexible coupling" crosslinking network by supramolecular structure to improve interfacial properties of high modulus carbon fiber reinforced polymer composites

Enhancement of surface electrical performances of epoxy film by blending with fluorinated and crosslinking monomer

Improving mechanical and electrical properties of fluoroelastomer nanocomposites by incorporation of low content of reduced graphene oxide via fast evaporation mixing

Mussel-inspired modification of carbon fiber via polyethyleneimine/polydopamine co-deposition for the improved interfacial adhesion