Abstract:The ablation threshold, depth and crater shape of fused silica for femtosecond laser processing are investigated theoretically and experimentally. Based on tracking the spatiotemporal distribution of the free electron density, free electron temperature, and laser intensity, the electron dynamics as well as the transient optical and thermophysical properties of femtosecond laser irradiated fused silica are quantitatively determined. The numerical model is validated by comparing the calculated threshold fluence, depth and crater shape of ablation with the experimentally measured ones at a wavelength of 800 nm. The free electron relaxation time at different laser fluences and pulse durations throughout the photoionization process and impact ionization process are probed. In the present work, the findings are as follows. 1) The electron relaxation time significantly affects the material optical properties and femtosecond laser energy absorption. The optical properties change dramatically. The fused silica becomes opaque for the case of laser irradiation with fluence higher than the ablation threshold. Moreover, the transition from electron-phonon collision to electron-ion collision accompanies with the femtosecond laser ablation of fused silica. 2) By using the proposed model, the experimentally observed saturation of ablation depth at high laser fluence is elucidated by the significant change of optical reflectivity and absorption coefficient. Both the results of theoretical simulation and experimental observation indicate that laser fluence has a strong influence on the shape of the ablation crater. The ablation volume increases sharply with the increase of laser fluence for femtosecond laser irradiation, compared with that for picosecond laser irradiation. 3) With the increase of femtosecond laser fluence, the ablation depth removal efficiency and ablation efficiency are both saturated, followed by slight decrements. The peak of ablation depth removal efficiency peak occurs at the femtosecond laser fluence close to 1.4 times of the ablation threshold. While the accuracy is slightly low due to the higher sensitivity of the ablation characteristics (ablation crater depth and ablation volume) to the shorter femtosecond laser pulse. For the femtosecond laser fluence higher than 3.5 times of the ablation threshold, good repeatability over a very wide fluence range can achieve accurate processing results, because a more consistent flat-bottom ablation profile tends to appear. However, the heat-affected zone leads the processing quality to degrade, compared with the scenario of femtosecond laser fluence close to the ablation threshold.

Analytical Description of the Damage Threshold of Femtosecond Pulses

Studying the Damage Threshold of Femtosecond Pulses

Threshold of Femtosecond Laser-Induced Damage in Transparent Materials

Femtosecond Laser Pulse Induced Damage In Thin Films - Art. No. 60281d

Threshold of Ultra-Short Pulse Laser-Induced Damage in Dielectric Materials

Damage threshold research of monocrystalline silicon solar cells under femtosecond laser illumination

Theoretical and Experimental Study on Femtosecond Laser-induced Damage in MgF2 Crystals

Analysis of Laser-induced Damage Threshold of Silica Optical Fiber Based on Finite Element Method

Ultraviolet-infrared Femtosecond Laser-Induced Damage in Fused Silica Andcaf2crystals

Damage Induced by Femtosecond Laser in Optical Dielectric Films

Prediction of Damage Threshold Fluence for Metal Films by an Ultrashort Laser Pulse

Theoretical and experimental study on femtosecond laser induced damage in CaF<sub>2</sub> crystals

Damage Induced 0n Fused Silica by Fundamental Frequency and Third Harmonic of Nd:YAG Laser

Damage Growth Characteristics on the Exit Surface of Fused Silica by the Low-Temporal Coherence Light Irradiation.

Influence of bulk defects on bulk damage performance of fused silica optics at 355 nm nanosecond pulse laser

Theoretical and Experimental Research of Femtosecond Laser Processing Fused Silica

Direct Observation of the Reversible and Irreversible Processes in Femtosecond Laser-Irradiated Fused Silica at the Near-Damage-threshold Fluence

Dynamics of Femtosecond Laser Pulse Induced Damage in Multilayers

A Two-Step Model for Multiple Picosecond and Femtosecond Pulses Ablation of Fused Silica

Damage Performance of TiO2/SiO2 Thin Film Components Induced by a Long-Pulsed Laser

Characterization of 355 Nm Laser-Induced Damage of Mitigated Damage Sites in Fused Silica