Abstract:Laser-induced damage of fused silica optics at 351 nm is a key factor limiting the output energy of high-power laser facility, especially the damage growth process. A comprehensive understanding of its damage growth behavior is of critical importance for high-power laser facility. Thus we study the laser-induced damage growth on the exit surface of fused silica under the subsequent illumination of 5 ns square pulses at 351 nm on a large-aperture high-power laser facility. Experiment is conducted with a 36 cm thick UV grade fused silica focus lens in clean atmosphere and at room temperature. 56 laser shots of 3 fluence in a range from 0.1 J/cm2 to 8.1 J/cm2 are fired during the experiment. And the damage initiation process and growth process are monitored and recorded with an online optics damage inspection instrument which has an optical resolution of about 50 m. Experimental results demonstrate that the sizes of exit-surface damage sites exponentially or linearly grow with laser shots and the damage growth rate increases with laser fluence. However, it is found that even under the same laser conditions the damage grow rate is not a fixed value, which means that besides the laser fluence other parameters also influence the damage grow process. In order to highlight some tendencies, we consider the single-shot damage growth rate and calculate the average of inside fluence bins. Statistical analysis shows that smaller sites tend to grow with larger growth rates than larger sites under the irradiation of the same laser fluence. This result indicates that damage growth rate is influenced by both laser fluence and damage site size. It suggests that the damage growth rule needs to be incorporated into a size-dependent growth effect. The result that higher growth rates are obtained for small damage sites may be related to the damage growth mechanism of fused silica. Damage crater of fused silica consists of a central core and numerous surrounding cracks. The defects in the central core absorb laser energy and yield plasma, then the plasma pressure will open the cracks on the periphery of the crater and lead to lateral and axial expansion of cracks which can be identified as damage growth. The fact that smaller sites grow faster than larger sites implies that smaller sites more efficiently couple laser energy into fracture energy. Our results have important implications for both the prediction of fused silica optics lifetime and the fundamental understanding of laser damage mechanism.

Influence of bulk defects on bulk damage performance of fused silica optics at 355 nm nanosecond pulse laser

Non-destructive evaluation of UV pulse laser-induced damage performance of fused silica optics

Bulk Damage and Stress Behavior of Fused Silica Irradiated by Nanosecond Laser

Micron-size bubble defects in fused silica and its laser induced damage near 355 nm

Correlation Between Photoluminescence Properties of Surface Defects and Laser-Induced Damage Threshold of Fused Silica

Laser-Induced Damage Growth on Larger-Aperture Fused Silica Optical Components at 351 Nm

Damage Behaviors of Silica Microparticles on Fused Silica Optics under 355 Nm High Fluence Laser

Laser-induced Damage Growth of Fused Silica at 351 Nm on a Large-Aperture High-Power Laser Facility

Characterization of artificial indentation defects in fused silica surface and its damage performance under 355 nm nanosecond laser

The damage mechanisms of fused silica irradiated by 355nm laser in vacuum

Analysis and Experimental Investigation of Laser Induced Damage of Optics

Behavior of 355 nm laser-induced damage growth in fused silica

First-principles Study of Metallic Impurities Induced 355 Nm UV Laser Absorption in Fused Silica

Ab Initio Molecular Dynamics Simulation of the Effect of Impurities on Laser-Induced Damage of Fused Silica

Strong UV laser absorption source near 355 nm in fused silica and its origination

Characterization of 355 Nm Laser-Induced Damage of Mitigated Damage Sites in Fused Silica

Laser Induced Damage in Fused Silica for 248 nm

Laser-induced damage growth of large-aperture fused silica optics under high-fluence 351 nm laser irradiation

Laser-induced defects in fused silica by UV laser irradiation

Effects of Vacuum on Fused Silica UV Damage

Relationship Between the Photoluminescence Envelope Area of Surface Defects and the Laser-Induced Damage Thresholds of Mechanically Machined Fused Silica Optical Surfaces