Abstract:The ablation threshold, depth and crater shape of fused silica for femtosecond laser processing are investigated theoretically and experimentally. Based on tracking the spatiotemporal distribution of the free electron density, free electron temperature, and laser intensity, the electron dynamics as well as the transient optical and thermophysical properties of femtosecond laser irradiated fused silica are quantitatively determined. The numerical model is validated by comparing the calculated threshold fluence, depth and crater shape of ablation with the experimentally measured ones at a wavelength of 800 nm. The free electron relaxation time at different laser fluences and pulse durations throughout the photoionization process and impact ionization process are probed. In the present work, the findings are as follows. 1) The electron relaxation time significantly affects the material optical properties and femtosecond laser energy absorption. The optical properties change dramatically. The fused silica becomes opaque for the case of laser irradiation with fluence higher than the ablation threshold. Moreover, the transition from electron-phonon collision to electron-ion collision accompanies with the femtosecond laser ablation of fused silica. 2) By using the proposed model, the experimentally observed saturation of ablation depth at high laser fluence is elucidated by the significant change of optical reflectivity and absorption coefficient. Both the results of theoretical simulation and experimental observation indicate that laser fluence has a strong influence on the shape of the ablation crater. The ablation volume increases sharply with the increase of laser fluence for femtosecond laser irradiation, compared with that for picosecond laser irradiation. 3) With the increase of femtosecond laser fluence, the ablation depth removal efficiency and ablation efficiency are both saturated, followed by slight decrements. The peak of ablation depth removal efficiency peak occurs at the femtosecond laser fluence close to 1.4 times of the ablation threshold. While the accuracy is slightly low due to the higher sensitivity of the ablation characteristics (ablation crater depth and ablation volume) to the shorter femtosecond laser pulse. For the femtosecond laser fluence higher than 3.5 times of the ablation threshold, good repeatability over a very wide fluence range can achieve accurate processing results, because a more consistent flat-bottom ablation profile tends to appear. However, the heat-affected zone leads the processing quality to degrade, compared with the scenario of femtosecond laser fluence close to the ablation threshold.

Theoretical and experimental study on femtosecond laser induced damage in CaF<sub>2</sub> crystals

Ultraviolet-infrared Femtosecond Laser-Induced Damage in Fused Silica Andcaf2crystals

Theoretical and Experimental Study on Femtosecond Laser-induced Damage in MgF2 Crystals

Microscopic Mechanisms of Ablation and Micromachining of Dielectrics by Using Femtosecond Lasers

Mechanisms In Fs-Laser Ablation In Fused Silica

KrF excimer laser induced damage and its mechanism of CaF2 single crystal with (1 1 1), (1 1 0) and (1 0 0) planes

Effect of Major Factors on Damage Threshold of Optical Rectification Crystals

The ablation process induced by femtosecond laser in transparent dielectrics

Damage Threshold of Lithium Niobate Crystal under Single and Multiple Femtosecond Laser Pulses: Theoretical and Experimental Study

Femtosecond Laser Pulse Induced Damage In Thin Films - Art. No. 60281d

Threshold of Femtosecond Laser-Induced Damage in Transparent Materials

The Ablation Mechanism and Ultra-Fast Dynamics Property of Lithium Fluoride with the Ultra-Short Pulse Laser

Theoretical and Experimental Research of Femtosecond Laser Processing Fused Silica

Mechanisms of Femtosecond Laser-Induced Damage in Magnesium Fluoride

Ablation Of Crystalline Oxides By Infrared Femtosecond Laser Pulses

Thermodynamic damage behavior of single-crystal MgF2 irradiated by high-power fiber laser

Femtosecond laser ablation of crystals SiO2 and YAG

Various damage mechanisms in carbon and silicon materials under femtosecond x-ray irradiation

Dynamics of Femtosecond Laser Pulse Induced Damage in Multilayers

Influence of erbium doping on the femtosecond laser damage characteristics of fluorozirconate glasses

Threshold of Ultra-Short Pulse Laser-Induced Damage in Dielectric Materials