Abstract:As is well known, a solid oxide fuel cell(SOFC) is a device that can convert chemical energy directly into electrical energy. The possibility to grow thin films of oxide materials is of great importance in the development of SOFC. Recently, it is expected that oxide heterostructures, with almost ideal interfaces, should lead to the interesting artificial materials with some novel properties. So we have prepared superlattice electrolyte thin films.On the MgO single-crystal substrates, multilayer epitaxial thin-film heterostructures of 20 mol% samarium-oxide-doped ceria (Ce0.8Sm0.2O2-, SDC) and 8 mol% yttria-stabilized zirconia (Y2O3: ZrO2YSZ) have been deposited in turn, using the pulsed laser deposition (PLD) technique. Five different superlattices (SDC/YSZ)N (N=3, 5, 10, 20, 30) films are fabricated, keeping the total thickness constant (300 nm), but with a different number of hetero-interfaces. The choice of coupling SDC and YSZ aims to have both layers in the superlattices made of oxygen-ion conductors with compatible crystallographic features. On one hand, we have to remove any potential contribution of the deposition substrate to the total conductivity, and the superlattices may be grown on 110-oriented MgO single-crystalline wafers. On the other hand, the YSZ electrolyte film requires that the temperature should be higher, and SDC as the electrolyte leakage; both should be combined with each other, so as to have complementary advantages. In this way, not only the temperature of SOFCs is reduced, but also the leakage avoided. Because YSZ and SDC both belong to cubic fluorite structure and have similar lattice parameters, the lattice constant of YSZ is 5.14 , and the lattice constant of SDC is 5.44 . Compatible crystal properties, oxygen ion conductivity, and great matching defects can lead to a semi-coherent interface between the ZrO2 and CeO2 layers. The interface effect is obvious. X-ray diffraction (XRD), high-resolution transmission electron microscopy (HR-TEM) and AC impedance mearurements are used to characterize the surface morphology, phase structure and electrical properties of the electrolyte film. Results show that the superlattice (SDC/YSZ)N electrolyte films will form obviously interface and better superlattice structure. This kind of thin films do not show crack, with no element diffusion at the interfaces, growing uniformly, densely and smoothly. Electrochemical measurements show a sizable increase in conductivity with increasing number of SDC/YSZ interfaces. So it is an ideal low-temperature fuel cell electrolyte materials.

Preparation and mechanism of CeO2 interlayer in stabilized ZrO2-based SOFC

Research progress of CeO2 interlayer in SSZ-based SOFC

Progress of Sm-doped CeO2 interlayer in electrodes/electrolytes

Preparation and Characterization of the Superlattice (Sm-Doped Ceria/Yttria-Stabilized Zirconia)N Electrolyte Film

Densification of Ce0.9Gd0.1O2-δ Interlayer to Improve the Stability of La0.6Sr0.4Co0.2Fe0.8 O3-δ/Ce0.9Gd0.1O2-δ Interface and SOFC

A new in situ strategy to eliminate partial internal short circuit in Ce0.8Sm0.2O1.9-based solid oxide fuel cells

Direct synthesis of Ce0.8Sm0.2−xZnxO2−δ electrolyte by sol–gel for IT-SOFC

Specific Cation Diffusion across the (La,Sr)MnO3 (Ce,Gd)O2 interface in SOFCs

Low Temperature Deposited (ce,gd)o2−x Interlayer for La0.6Sr0.4Co0.2Fe0.8O3 Cathode Based Solid Oxide Fuel Cell

Preparation and properties of rare earth co-doped Ce0.8Sm0.2-xYxO1.9 electrolyte materials for SOFC

Improved Electrochemical Performance of NiO–La0.45Ce0.55O2−δ Composite Anodes for IT-SOFC Through the Introduction of a La0.45Ce0.55O2−δ Interlayer

Fabrication of (Sm, Ce)O2−δ interlayer for yttria-stabilized zirconia-based intermediate temperature solid oxide fuel cells

Investigation of Ce-based buffer layers on electrochemical performance of YSZ-based symmetric solid oxide fuel cells

Preparation of a Gd0.1Ce0.9O2−δ interlayer for intermediate-temperature solid oxide fuel cells by spray coating

Electrical properties of CeO2-Y2O3 electrolyte SOFCs

In Situ Densification of Gadolinium-Doped Ceria Interlayer by Infiltration Process in SOFC

Interdiffusion between gadolinia doped ceria and yttria stabilized zirconia in solid oxide fuel cells: Experimental investigation and kinetic modeling

Boosting Electrochemical Performance via Extra‐Role of La‐Doped CeO2‐δ Interlayer for "Oxygen Provider" at High‐Current SOFC Operation

Electrode Performance and Analysis of Reversible Solid Oxide Fuel Cells with Proton Conducting Electrolyte of BaCe0.5Zr0.3Y0.2O3−δ

Co/Fe Oxide and Ce 0.8 Gd 0.2 O 2-Δ Composite Interlayer for Solid Oxide Electrolysis Cell

Suppressing Structure Delamination for Enhanced Electrochemical Performance of Solid Oxide Cells