Abstract:Reversible solid oxide cell (R-SOC) has triggered research interest from the past few years for its reversible applicability for power-to-fuel (P2F) in electrolyser cell (SOEC) to generate hydrogen by splitting of high temperature steam and fuel-to-power (F2P) in fuel cell (SOFC) mode of operation to produce power by oxidation of fuel with >80% conversion efficiency [1]. Primarily, R-SOC consists of a dense electrolyte conventionally yttria stabilized zirconia (YSZ), bridged between two porous electrodes, e.g., strontium doped lanthanum manganite (LSM) as air electrode and Nickel (Ni)-YSZ cermet as fuel electrode. Significant research has been devoted to carry out the long-term stability (≥ 2000 h) degradation in endurance test primarily due to major challenges like highly humid environment in the fuel electrode, microstructural flaws and polarization losses under high operational temperature. In this context, mixed ionic and electronically conducting (MIEC) oxide-based La-Sr-Co-Fe-O (LSCF) and Ba-Sr-Co-Fe-O (BSCF) air electrodes has drawn significant attention for the effective oxygen reduction (ORR) and oxygen evolution (OER) reaction in the context of SOFC and SOEC operational mode [2,3]. An attempt has been made in this present research work to establish the effect of off-stoichiometry in A-site lattice over the stoichiometric pristine compositions of La/Ba-Sr-Co-Fe-O (LSCF/BSCF)-based multicomponent MIEC-oxides and their associated heterostructure with optimised off-stoichiometric compositions that governs the electrochemical redox phenomena in conjunction with the functionally engineered Gd-doped ceria-based interlayer and buffer layer. Vacancy driven oxygen reduction (ORR) and oxide ion oxidation (OER) kinetics as a function of aliovalent charge compensation mechanism associated with the defect chemistry has also been investigated for these A-site non-stoichiometric compositions in the range of 1-0.92 for La/Ba (1-x) Sr x Co 1-y Fe y O 3-δ [x=0.4 and y=0.2]. A comparative study between the performance of the off-stoichiometric heterostructure synthesised using the optimised pristine compositions with that of the stoichiometric heterointerface has also been evaluated for their efficiency as catalyst for OER/ORR in reversible SOC mode of operation. The increasing trend of oxygen non-stoichiometry (δ) upon the transition from A-site stoichiometry to non-stoichiometric compositions reflected the formation of higher aliovalent cation of ‘Co’ to maintain the charge neutrality and thereby accelerates the associated oxygen redox kinetics. An optimum δ-value of 0.33 and 0.37 are found for LSCF and BSCF-compositions respectively having A-site non-stoichiometry of 0.94. Current density of 0.45 A.cm -2 at an applied voltage of 1.5 V @800°C is obtained for stoichiometric composition of LSCF wherein 0.5 A.cm -2 is found for the off-stoichiometric batch corresponding to the hydrogen flux of 0.21Nl.h -1 .cm -2 . Such augmentation in performance may be related to the formation of higher lattice defect which eases the path for oxide ion oxidation. Formation of the interpenetrating heterointerface network at the air electrodes and electrode/electrolyte interfaces in the morphologically engineered cells having gradation in porosity has further been confirmed from Transmission Electron Microscopy (TEM) studies involving the high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) and the STEM-EDS elemental spectrum mapping images of the cross-section of the sintered cells and clinically corelated with SOC performances. Orientation of the crystal lattice planes in the two types of grains across the heterojunction has also been determined from the High-Resolution Transmission Electron Microscopy (HRTEM) images. Further study to envisage the presumed hypothesis, based on the rate determining steps involving the defect lattice formation and probable mechanism for selective ORR/OER application, will also be described through hole and/or oxygen vacancy formalism using XPS and density functional theory (DFT) for such hetero-interpenetrating air electrodes. References: [1]. Y. Zhang et al. Int. J. Hydrog. Energy. 45 (2020) 5554. [2]. S. Dey et al. Int. J. Hydrog. Energy. 45 (2020) 3995-4007. [3] S. Dey et al. Ceram. Int. 48 (2022) 35799-35813.

Suppressing Structure Delamination for Enhanced Electrochemical Performance of Solid Oxide Cells

A new in situ strategy to eliminate partial internal short circuit in Ce0.8Sm0.2O1.9-based solid oxide fuel cells

Highly Active and Robust A-site Deficient La0.77Sr0.2Co0.2Fe0.8O3-δ Fiber Base Electrode for Intermediate Temperature Solid Oxide Cells

A simple Ce-doping strategy to enhance stability of hybrid symmetrical electrode for solid oxide fuel cells

High performance and stability of nanocomposite oxygen electrode for solid oxide cells

Electrochemical and microstructural characterization of the high‐entropy perovskite La0.2Pr0.2Nd0.2Sm0.2Sr0.2CoO3‐δ for solid oxide cell air electrodes

Atomic‐Scale Engineering for New Generation Air Electrode Materials of Solid Oxide Cells: Quintuple Perovskite Sm2Ba3Co2Fe3O15‐δ with Twinned Crystal Structure

Improving the Electrocatalytic Activity and Durability of the La0.6Sr0.4Co0.2Fe0.8O3-delta Cathode by Surface Modification

Enhancing the CO2 Electrolysis Performance by Ce Doped La0⋅7Sr0⋅3Fe0⋅9Ni0⋅1O3-δ Electrode in Symmetric Solid Oxide Electrolysis Cell

Enhancing chemical stability and performance in proton-conducting solid oxide fuel cells through novel composite cathode design

Study of a novel microstructured air electrode/electrolyte interface for solid oxide cells

Cerium and ruthenium co-doped La<sub>0.7</sub>Sr<sub>0.3</sub>FeO3- as a high-efficiency electrode for symmetrical solid oxide fuel cell

An Innovative and Facile Synthesis Route of (la,sr) 2feo 4+ Δ –la 0.4sr 0.6feo 3− Δ Composite As a Highly Stable Air Electrode for Reversible Solid Oxide Cell Applications

Structure and Interface Design Enable Stable Li-Rich Cathode

Ce0.8sm0.2o1.9 Decorated with Electron-Blocking Acceptor-Doped Baceo3 As Electrolyte for Low-Temperature Solid Oxide Fuel Cells

Multicomponent Mixed Ionic and Electronic Conducting (MIEC) Air Electrodes and Their Heterointerface for Effective Application in Reversible Solid Oxide Cell (R-SOC): Efficacy of Stoichiometric and Off-Stoichiometric Compositions

Nanoscale Intertwined Biphase Nanofiber as Active and Durable Air Electrode for Solid Oxide Electrochemical Cells

In Situ Formation of Er0.4Bi1.6O3 Protective Layer at Cobaltite Cathode/Y2O3-ZrO2 Electrolyte Interface under Solid Oxide Fuel Cell Operation Conditions

Achieving Strong Coherency for a Composite Electrode Via One-Pot Method with Enhanced Electrochemical Performance in Reversible Solid Oxide Cells

Highly active and stable Er0.4Bi1.6O3 decorated La0.76Sr0.19MnO3+δ nanostructured oxygen electrodes for reversible solid oxide cells

Electrochemical Performance and Stability of Lanthanum Strontium Cobalt Ferrite Oxygen Electrode with Gadolinia Doped Ceria Barrier Layer for Reversible Solid Oxide Fuel Cell