Abstract:Solid oxide fuel cells (SOFCs) have been attracting people's attention for their high energy conversion efficiency, good fuel compatibility, no precious metal catalysts, and pollution-free emissions. However, the high operating temperature (800-1200℃) of the traditional SOFC can reduce the long-term stability and cause the difficulties in either the selecting of material or the sealing of SOFC. Therefore, great efforts have been devoted to developing the intermediate temperature SOFC (IT-SOFC), which works at 600-800℃. In the IT-SOFC, the ionic conductivity of doped CeO2-based electrolyte has a significant advantage relative to that of the conventional yttria-stabilized zirconia (YSZ) electrolyte. For example, at 600℃, the ionic conductivity of Sm-doped CeO2 is 0.02 S/cm much higher than that of the traditional YSZ electrolyte (only 0.0032 S/cm). Therefore, the doped CeO2-based electrolyte is a very promising electrolyte for IT-SOFC.Recently, the co-doping of two different elements into CeO2 has become a hot research topic. The ionic conductivity of Sm3+ and Sr2+ co-doped CeO2 has proved to be nearly twice as high as that of Sm3+ doped CeO2 (SDC). However, the mechanism for the co-doping effect on the conductivity of CeO2 is not clear. In this paper, Sm3+ and Sr2+ co-doped CeO2 is systematically studied using the DFT+U method. The microscopic properties of the Sm3+ and Sr2+ co-doped CeO2 including electronic density of states, band structure, oxygen vacancy formation energy and oxygen vacancy migration energy and so on have been calculated and analyzed by comparing with those of the Sm3+ or Sr2+ single doped CeO2. The calculation results indicate that Sm3+ and Sr2+ co-doping has a synergistic effect on the performance improvement of CeO2-based electrolyte, which can not only suppress the electronic conductivity of doped CeO2 system, but also can reduce the oxygen vacancy formation energy on the basis of single doped CeO2. The existence of Sm3+ can help to reduce the trapping effect of Sr2+ on oxygen vacancies, meanwhile the addition of Sr2+ can further reduce the minimum oxygen vacancy migration energy on the basis of SDC. Calculations by the climbing image nudged elastic band (CINEB) method indicate that the oxygen vacancy migration energy of the co-doped system can reach as low as 0.314/0.295 eV, which is lower than the minimum oxygen vacancy migration energy of SDC. Our research reveals the synergistic mechanism for Sm3+ and Sr2+ co-doping effect on the conductivity of CeO2, which is of great instructive significance for the further research and development of other high-performance co-doped electrolyte materials in IT-SOFC.

Research progress of CeO2 interlayer in SSZ-based SOFC

Progress of Sm-doped CeO2 interlayer in electrodes/electrolytes

Preparation and mechanism of CeO2 interlayer in stabilized ZrO2-based SOFC

In Situ Densification of Gadolinium-Doped Ceria Interlayer by Infiltration Process in SOFC

Densification of Ce0.9Gd0.1O2-δ Interlayer to Improve the Stability of La0.6Sr0.4Co0.2Fe0.8 O3-δ/Ce0.9Gd0.1O2-δ Interface and SOFC

Specific Cation Diffusion across the (La,Sr)MnO3 (Ce,Gd)O2 interface in SOFCs

Investigation of Ce-based buffer layers on electrochemical performance of YSZ-based symmetric solid oxide fuel cells

Improved Electrochemical Performance of NiO–La0.45Ce0.55O2−δ Composite Anodes for IT-SOFC Through the Introduction of a La0.45Ce0.55O2−δ Interlayer

Boosting Electrochemical Performance via Extra‐Role of La‐Doped CeO2‐δ Interlayer for "Oxygen Provider" at High‐Current SOFC Operation

Investigation of the Preparation and Performance of Multi-Layer Composite Cathode for SOFCs

Performance and Stability Analysis of SOFC Containing Thin and Dense Gadolinium-Doped Ceria Interlayer Sintered at Low Temperature

A new in situ strategy to eliminate partial internal short circuit in Ce0.8Sm0.2O1.9-based solid oxide fuel cells

Fabrication of (Sm, Ce)O2−δ interlayer for yttria-stabilized zirconia-based intermediate temperature solid oxide fuel cells

DFT+U Calculation of Sm3+ and Sr2+ Co-Doping Effect on Performance of CeO2-based Electrolyte

Bifunctional Ce0.9Gd0.09M0.01O2−δ (M = Fe, Cu) interlayers with micro-doping for high-performance solid oxide fuel cells

Low Temperature Deposited (ce,gd)o2−x Interlayer for La0.6Sr0.4Co0.2Fe0.8O3 Cathode Based Solid Oxide Fuel Cell

Interdiffusion between gadolinia doped ceria and yttria stabilized zirconia in solid oxide fuel cells: Experimental investigation and kinetic modeling

Preparation and Characterization of the Superlattice (Sm-Doped Ceria/Yttria-Stabilized Zirconia)N Electrolyte Film

Conducting Property and Performance Evaluation of LNF As Cathode Current Contact Layer in Solid Oxide Fuel Cell

A High Performance Interconnecting Ceramics for Solid Oxide Fuel Cells (Sofcs)

Construction and Scale-Up of High Performing SOFC with Enhanced GdxCe1−xO2−δ Barrier Layer Self-Crystallization and Defect-Free GDC-YSZ Interface