Abstract:Background: Natural fiber reinforced materials with polymer matrix finds many applications in industries due to its excellent property. Fiber laminate composite materials have been researched around the globe and were tested to determine its beneficial properties for specific purposes. These composite materials have improved to withstand external loads. However, drilling of composite has remained a difficult task because of its anisotropic material properties. Methods: In this study abaca and kenaf woven mat with the carbon woven mat are laminated using epoxy resin (HY 951) and hardener (LY556) as matrix element while preparing the hybrid composite materials. The drilling operations are carried out using automatic feed computer controlled vertical axis drilling machine. Results: It is found that the drilling force, delamination peel up and push out for the composite material depended on feed rates, drill bit diameters and speeds respectively. The optimal input parameters are obtained using Taguchi L27 orthogonal array, Response Surface Methodology (RSM) and Analysis Of Variance (ANOVA) methods. It is observed that lower feed, smaller drill diameter and moderate speed provided high quality drilled hole. The drilled-hole quality, drilling damages are observed by using profile projector. Conclusion: The following conclusion can be drawn from the present investigation on drilling of reinforced composite materials drilled in different conditions. Feed rate is the important factor compared to the feed and the tool diameter. When feed rate is increased, thrust force also increases. However, thrust force decreases when the cutting speed increases. Feed influenced the thrust force instead of speed and torque during drilling. The drilling induced damages are minimum during lower feed and lower diameter drill. Hence, lower drill diameter, lower feed rate and medium speed are more suitable for drilling the hybrid composites.

Relationship Between the Depth of Drilling and Residual Strain Relief in Fiber Reinforced Composite Materials

A New Strategy of Carbon Fiber Reinforced Plastic Drilling Evaluation Using Thermal Measurement

Understanding the Impact of Fibre Wrinkle Architectures on Composite Laminates Through Tailored Gaps and Overlaps

Measurement of Residual Stresses in Fiber Reinforced Composite Material

Hole-drilling Method Using Grating Rosette and Moiré Interferometry

Effects of Specialized Drill Bits on Hoe Defects of CFRP Laminates

Effect of Drilling Force on Delamination of Abaca/Kenaf/Carbon Fiber Reinforced Hybrid Composite

A Microscale Analysis of Thermal Residual Stresses in Composites with Different Ply Orientations

Study on Optimization of Drilling Parameters for Laminated Composite Materials

Modeling on the Effect of Automated Fiber Placement Induced Gaps in Curved Composite Laminates

A Study on Residual Stresses in Polymer Composites Using Moiré Interferometry

Multi-Directional Strain Measurement in Fiber-Reinforced Plastic Based on Birefringence of Embedded Fiber Bragg Grating

Fatigue and Fretting Behaviors of Self-piercing Riveting in Carbon-Fiber-Reinforced Polymer Laminates and Titanium Sheets with Pre-drilling Operation

Effect of the Meso-Structure on the Strain Concentration of Carbon-Carbon Composites with Drilling Hole

Effect of drills with different drill bits on delamination in drilling composite materials

Analysis of Drilling-Induced Geometrical Damages in Basalt and Carbon Fibre-Reinforced Polymer (BFRP and CFRP) Composites

Effects of Drilling Area Temperature on Drilling of Carbon Fiber Reinforced Polymer Composites Due to Temperature-Dependent Properties

Drilling Damage in Composite Material

Investigation of Residual Stress in 2D Plane Weave Aramid Fibre Composite Plates Using Moiré Interferometry and Hole‐Drilling Technique

Experimental Study of the Residual Stress of Integrated Composite Structure

Experimental determination of residual stresses in composite laminates [02/θ2]s