Abstract:Fiber-reinforced aluminum matrix composites have a wide range of application prospects in aerospace, automotive, and other fields. In order to further optimize the processing technology and improve the processing efficiency, the high-speed drilling mechanism of FeCoNiCrAl high-entropy alloy fiber-reinforced 7050 aluminum matrix composites was investigated in this study. A composite plate composed of three-layer unidirectional fiber-reinforced composite was constructed by using ABAQUS finite element software. The effects of different bit geometry parameters and drilling parameters on drilling force, stress–strain, and subsurface damage were studied during high-speed drilling. The results show that the drilling force is positively correlated with the feed speed and decreases with the increase of the spindle speed. The drilling force is positively correlated with spiral angle and negatively correlated with top angle. With the increase of feed speed, the area of the height stress area of the inlet and outlet increases first and then decreases, and the maximum point is 450 mm/s and 400 mm/s, respectively. With the increase of spindle speed, the area of the entrance layer increased first and then decreased. The area of the entrance layer was the largest when the spindle speed was 600 r/s, and the area of the outlet layer increased with the spindle speed. When the screw angle is 40° and the top angle is 90°, the main cutting edge of the bit drills out the whole plate, the processing quality of the drilling is relatively best. With the increase of spiral angle, the subsurface damage range of fiber at the inlet and outlet layer decreases. As the top angle increases, the damage range increases first and then decreases, showing a peak trend. With the increase of feed speed, the damage range decreases first and then increases. The damage range increases significantly with the increase of spindle speed.

Effect of the Meso-Structure on the Strain Concentration of Carbon-Carbon Composites with Drilling Hole

Investigation on the Effects of Microstructure on Machining Unidirectional Carbon Fiber Reinforced Polymer Composites with a Modified Force Model

Effects of Meso-Structure in Grinding of 2.5D Woven Fiber-Reinforced Ceramic Composites

Clustering Effect on Mechanical Properties and Failure Mechanism of Open Hole High Modulus Carbon Fiber Reinforced Composite Laminates under Compression

Effect of off-axis angle on mesoscale deformation and failure behavior of plain-woven C/SiC composites with digital image correlation

Meso-scale modeling and damage analysis of carbon/epoxy woven fabric composite under in-plane tension and compression loadings

Micro-CT Characterization on the Meso-Structure of Three-Dimensional Full Five-Directional Braided Composite

Mesoscale mechanism of damage in fracture process zone of CFRP laminates simulated with triaxial stress state-dependent constitutive equation of matrix resin

In situ characterization of the flexural behavior and failure mechanism of 2D needle-punched carbon/carbon composites by digital image correlation

Structural influences of two-dimensional and three-dimensional carbon/epoxy composites on mode I fracture toughness behaviors with rate effects on damage evolution

High-Strain-Rate Compression Behavior and Failure Mechanism of 3d Mwk Carbon/Epoxy Composites

Modelling the needling effect on the stress concentrations of laminated C/C composites

Multiscale numerical investigation on failure behaviour of three-dimensional orthogonal woven carbon/carbon composites subjected to pin-loading

Research of Circuitous Hole Structure of Mineral-collagen Fibers in Tibia

Progressive damage modelling and experimental investigation of three-dimensional orthogonal woven composites with tilted binder

High-speed drilling mechanism study of unidirectional CoCrFeNiAl fiber-reinforced aluminum matrix composites

Effect of Mode III Fracture on Composite Laminates

An investigation into mechanical properties of a 3D printed two-matrix continuous fiber composites with multi-cavity structure

Multi-Scale Modeling and Damage Analysis of Composite with Thermal Residual Stress

Multiscale Numerical Scheme on Shear Failure Feature of 3dowc/cs Bar Incorporating Microlevel Uncertainties and Coupled Constitutive Behavior

Influence of Complex Geometries on Damage Tolerance of Porous Carbon Fiber Network