Abstract:The effect of coating cracking during depth-sensing indentation testing (e.g. nanoindentation testing) on systems comprising thin hard coatings (e.g. TiN) on a less stiff, hard substrate (e.g. steel) has been investigated in order to establish whether, at such small scales, the occurrence of annular through-thickness cracks around indentation sites can be detected from load–displacement plots and whether any accompanying localized debonding of the coating from the substrate can also be identified. Experiments were performed on thin TiN and NbN monolayers, and compositionally modulated TiN/NbN and TiN/ZrN deposited onto hard steel or stainless steel substrates. Above a critical load (Pcrit) in the range 80–500mN, all systems exhibited annular through-thickness cracks around indentation sites. The cracking was found to be accompanied by a discrete change in gradient of the loading portion of the load–displacement curve. Also, analysis of the unloading curves beyond this point showed that elastic recovery was controlled by the elastic modulus of the underlying substrate material alone. The cracking mechanism has been characterized using scanning electron microscopy, coupled with optical profilometry to map the detailed z-displacement of the surface — a procedure critical to understanding whether coating–substrate debonding had occurred. Some cracks were found to show a spiral morphology and the effect of indentation loading rate was investigated to see if appearance of these cracks was loading-rate sensitive. Our results highlight the problems inherent in assessing both the interfacial failure and the interfacial fracture toughness of thin film coated systems at the small contact scales (⩽1μm) associated with crack genesis where it is difficult to confirm the extent of sub-surface cracks by conventional means. We have also demonstrated that both load–displacement and load–displacement squared plots are necessary if a more complete understanding of system behaviour is to be gained. Also, a simple fracture mechanics model for the annular cracking behaviour seen in such systems has been derived and used to estimate a value of Gic (the interfacial work of fracture) as 180Jm−2 for the TiN/ZrN-stainless steel system.

Use of Scaling Functions to Determine Mechanical Properties of Thin Coatings from Microindentation Tests

Finite element analysis of the critical ratio of coating thickness to indentation depth for coating property measurements by nanoindentation

Measuring elastoplastic properties of thin films on an elastic substrate using sharp indentation

Indentation stress–strain analysis and finite element simulation to determine elastoplastic properties of thin films decreasing the substrate contribution

Determination of mechanical properties from sharp dynamic indentation

An Inverse Approach to Determine the Mechanical Properties of Elastoplastic Materials Using Indentation Tests

Relationship of Stiffness-Based Indentation Properties Using Continuous-Stiffness-Measurement Method

Finite Element Analysis of the Nanomechanics of Hard Coatings on a Soft Polymer Substrate by a Spherical Indenter

Identification of Elastic-Plastic Material Parameters from Pyramidal Indentation of Thin Films

Determining mechanical properties of thin film in packaging structures by in-situ nanoindentation

Spherical Indentation into Elastoplastic Materials: Indentation-response Based Definitions of the Representative Strain

Elastic constants determination of anisotropic materials by depth-sensing indentation

The effect of coating cracking on the indentation response of thin hard-coated systems

Indentation of Coatings at micro/nano scale: Crack formation and deflection

Identification of plastic properties through spherical indentation

Accurate measurement of thin film mechanical properties using nanoindentation

The Influence of Indenter Tip Imperfection and Deformability on Analysing Instrumented Indentation Tests at Shallow Depths of Penetration on Stiff and Hard Materials

Determining plastic properties of a material with residual stress by using conical indentation

Nano-Indentation for Characterizing Mechanical Properties of Soft Materials

Identifying the Viscoelastic Properties of Soft Matter from the Indentation Response of a Hard Film-Soft Substrate System

Square indentation on a soft elastomer layer with finite thickness