Abstract:We have attempted to apply the computer-based finite element analysis (FEA) method to accurately measure the mechanical properties (e.g., hardness and elasticity) of a soft material by an indentation test. First, an axisymmetric model has been developed using commercially available FEA code ANSYS. The FEA model consisted of a thin Al-film resting on Si-substrate. A spherical indenter has been used to indent the Al-film, which traveled a predefined depth during the loading and unloading cycles. First, numerical simulations were conducted to get the force vs. displacement plot, which was later used to determine the modulus of elasticity and hardness of Al-film. The effects of substrate modulus and indentation depth were thoroughly investigated to determine the modulus and hardness of Al-film. The effect of friction, considered at the interface of indenter and Al-film, was found to offer minimum impact for relatively small indentation depth. The induced force on the Al-film by the indenter has been found to be higher with increasing indentation depth when friction was considered. However the contact stiffness, represented by the slope of the unloading curve, has been found almost the same with and without considering friction. The variation of substrate modulus has been found to be ineffective to capture the Al-film modulus for relatively small indentation depth. However for higher indentation depth, the substrate modulus has been found to offer profound effect to capture the film modulus. The hardness of the Al-film has also been found to be relatively unaffected with variation of substrate modulus. However, the hardness of the Al-film has been found to be higher with friction for relatively high indentation depth. Results obtained from this preliminary research are important to continue further investigation and to characterize the mechanical properties of other soft-materials, e.g., biofilms to minimize its detrimental effects and utilize its favorable aspects in industrial and biomedical applications.

Determining mechanical properties of thin film in packaging structures by in-situ nanoindentation

In Situ Nanoindentation Mechanical Property of Films by Atomic Force Microscope

Measuring elastoplastic properties of thin films on an elastic substrate using sharp indentation

Numerical studies on deformation and adhesion behaviour of substrate during nanoindentation

Effect of Surface Roughness on Nanoindentation Test of Thin Films

Accurate measurement of thin film mechanical properties using nanoindentation

Full field and microregion deformation measurement of thin films using electronic speckle pattern interferometry and array microindentation marker method

Determining the constitutive behavior of nonlinear visco-elastic-plastic PMMA thin films using nanoindentation and finite element simulation

Nano-Indentation for Characterizing Mechanical Properties of Soft Materials

Measuring Thin Film Elastic Modulus Using A Micromachined Cantilever Bending Test by Nanoindenter

Measuring the elastic modulus and residual stress of freestanding thin films using nanoindentation techniques

Critical Review of Nanoindentation-Based Numerical Methods for Evaluating Elastoplastic Material Properties

In Situ and Real-Time Tensile Testing of Thin Films Using Double-Field-of-view Electronic Speckle Pattern Interferometry

Video Enhanced Depth-Sensing Indentation Technique for Characterizing Mechanical Behaviour of Biomaterials

Mechanical Properties Characterization of Two-Dimensional Materials Via Nanoindentation Experiments

Finite Element Analysis of Nanoindentation Responses in Bi2Se3 Thin Films

Identifying the elastoplastic properties of ductile film on hard substrate by nanoindentation

Identifying the Viscoelastic Properties of Soft Matter from the Indentation Response of a Hard Film-Soft Substrate System

Indentation stress–strain analysis and finite element simulation to determine elastoplastic properties of thin films decreasing the substrate contribution

Application of Nanoindentation Tests in the Research of Nanomaterials

Nanohardness by Nanoindentation