Abstract:Summary Depth-sensing instrumented indentation tests are widely used to probe the mechanical properties of materials at a local area and small scales. Generally, indented solid was assumed semi-infinite plane solid because the contact region is small comparing the indented solid. However, for some biomaterial, such as skin, cornea and sclera, the effect of the curvature of the surface cannot be ignored. Using systematic finite element analysis and dimensional analysis, a method to determine the elastic modulus of the materials with curved surface is proposed using flat punch indentation in this paper. An axisymmetric, two-dimensional model was adopted and four-node bilinear axisymmetric elements with reduced integration and hourglass control were used to model the semi-infinite solid. The boundary conditions were such that the outer surface nodes were traction-free with fixed lower surface nodes. The size of the indented solid is taken to be large enough compared with the maximum contact radius, thus the boundary conditions basically have no effect on the computational results. . The material is assumes as linear elastic materials with the Poisson’s ratio 0.49. Then, the indention force can be expressed as a function, including the elastic modulus of the indented solid, the indentor radius, the indentation depth and the curvature radius of the indented solid. According to the dimensional analysis and finite element analysis, for a certain ratio value of indentation depth to the indentor radius, a dimensionless function expression of indention force can be obtained. Then, the elastic modulus can be determined using dimensionless function and the indentation test. It is shown from the results that the effect of the curvature will reduce with the ratio value of indentor radius to curvature radius of the indented solid.

Square indentation on a soft elastomer layer with finite thickness

Indentation of A Square Elastomeric Thin Film by A Flat-Ended Cylindrical Punch in the Presence of Long-Range Intersurface Forces

Surface Effects on the Indentation of a Soft Layer on a Rigid Substrate with an Elliptical Cylinder Indenter

Finite Element Analysis of the Indentation Stress Characteristics of the Thin Film/Substrate Systems by Flat Cylindrical Indenters

Measuring elastoplastic properties of thin films on an elastic substrate using sharp indentation

Indentation of pre-deformed compressible soft electroactive layer on substrate

New sharp indentation method of measuring the elastic–plastic properties of compliant and soft materials using the substrate effect

Analytical Solution of Indentation Response of an Elliptical Cylindrical Indenter on Elastic Microbeam with Surface Tension

A Reverse Numerical Approach to Determine Elastic-plastic Properties of Multi-layer Material Systems with Flat Cylindrical Indenters

Development of a micro-indentation device for measuring the mechanical properties of soft materials

The Use Of Flat Punch Indentation To Determine The Viscoelastic Properties In The Time And Frequency Domains Of A Soft Layer Bonded To A Rigid Substrate

An elastic-plastic indentation model for different geometric indenters and its applications

An Experimental Study on the Contact Problem of Spherical Indentation on the Anisotropic Elastic Half-Space Based on Imaging

Elastic Contact Versus Indentation Modeling of Multilayered Materials

Spherical Indentation into Elastoplastic Materials: Indentation-response Based Definitions of the Representative Strain

The Indentation Elastic Response - Indentation Shape and the Stress Distribution

Indentation of a Plate on a Thin Transversely Isotropic Elastic Layer

Effect of the curvature for the indented solid with curved surface using flat punch indentation

Surface Effects on Cylindrical Indentation of a Soft Layer on a Rigid Substrate

Axisymmetric Indentations of an Elastic Half-Space with Tensed Surface/Membrane in the Johnson–Kendall–Roberts Adhesive Approximation

Mechanics of Indentation for Piezoelectric Thin Films on Elastic Substrate