Abstract:Layer-substrate system penetrated by a rigid indenter has been frequently used as the physical model for interpreting the indentation test of advanced materials. In this paper, the indentation of a pre-deformed compressible soft electroactive (SEA) layer on an elastic substrate is formulated as a Fredholm integral equa-tion of the second kind, which is solved by a customized finite-difference scheme to fulfil the full-field analysis. Especially, the modified JKR model established in the half-space case is invoked to take account of surface adhesion for the peculiar layer-substrate system. As an example, the neo-Hookean ideal dielectric elastomer is considered, and the effects of adhesion (due to surface energy) and substrate (due to different mechanical and electrical properties from the layer) on the indentation responses are scrutinized. Numerical results indicate that, when a soft layer overlies a stiffer substrate, the contact radius should be smaller than the layer thickness for the validity of linear analysis. In this case, as the contact radius exceeds about 1/10 of the layer thickness, the indentation responses are found to vary significantly with the shear modulus ratio between the layer and the substrate while they are insensitive to the variation of Poisson's ratio of the substrate within the linear regime. Moreover, an interesting phenomenon is revealed that the indentation responses (e.g., the surface normal stress) induced by adhesion will be suppressed by stiffening of the substrate, and vice versa.

Indentation of pre-deformed compressible soft electroactive layer on substrate