Abstract:Synthesis of blue organic light-emitting materials is very important for practical applications of(organic) light-emitting diodes(OLEDs).Organometallic complex lithium tetra-(8-hydroxy-quinolinato) boron(LiBq_4) was synthesized,purified and used as light-emitting material.Blue ITO/PVK∶TPD/LiBq_4/Alq_3/Al OLED was fabricated adopting spin and vacuum deposition,and the electroluminescence spectrum was(measured) at different operation voltage.At the same time,the influence of thickness of Alq_3,CuPc and LiF on the luminescence properties of blue OLEDs was studied.Results indicated that,the peak wavelength of(fluorescence) spectrum for LiBq_4 is about 452 nm under excitation of 350 nm.The peak wavelength of(electroluminescence) spectrum for blue OLED ITO/PVK∶TPD/LiBq_4/Alq_3/Al device locates at 475 nm,and one weak shoulder peak appears at about 500 nm,this is resulted from excitation of Alq_3.The luminance of this blue OLED can reach 430 cd/m~2 at 25 V operate voltage.As electron transfer material,the thickness of Alq_3 film has distinct influence on the electroluminescence spectra and luminance of blue OLEDs.Through(adjusting) the thickness of Alq_3 layer,the recombination region of holes and electrons can be restricted in LiBq_4,and the shoulder peak will weaken and disappear.The optimal thickness of Alq_3 film is about 10 nm.(Although) the addition of CuPc between ITO and PVK∶TPD could enhance the injection ability of holes,(simultaneously) induces the imbalance injection of charge carriers,and deteriorates the properties of blue OLED.The addition of LiF thin film between Alq_3 and Al cathode could enhance the injection ability of(electrons,) and makes the injection of electrons reach equilibrium with holes.So the recombination probability of holes and electrons was improved and the luminance of blue OLED was improved evidently.These results were explained with the schematic energy level structure of the blue OLEDs.

Efficient Hole-Blocker with Electron Transporting Property and Its Applications in Blue Organic Light-Emitting Devices

Efficient Blue Organic Light-Emitting Diodes Employing Thermally Activated Delayed Fluorescence

Novel Hole Blocking Material for Organic Light-Emitting Devices

Time-Dependent Density Functional Theory Study of the Al Complexes with Aromatic Ligands for Blue Organic Light-Emitting Diodes

P-113: Novel Structure Organic Light-Emitting Diodes with High Performance

Novel phosphine oxide-based electron-transporting materials for efficient phosphorescent organic light-emitting diodes

Extremely Stable Deep-Blue Organic Light-Emitting Diodes Employing Diindolophenazine-Based Fluorophore with Narrow-Band Emission and a Shallow LUMO Level

Blue organic electroluminescent device with tetra(β-naphthyl)silane as hole blocking materials

An Efficient Blue Organic Light Emitting Structure

P-113: Society for Information Display: Novel Structure Organic Light-emitting Diodes With High Performance

Improved Performance of Alq(3)-based Organic Light-Emitting Diode with Multi-Layer Structure

Investigation of Novel Efficient Electron Injection Lithium Complex Containing Quinoxaline Moiety for Organic Light-Emitting Diodes

High-efficiency Blue-Emitting Organic Light-Emitting Devices with 4, 4′, 4″-Tris(n-carbazolyl)-triphenylamine As the Hole/exciton-Blocking Layer

A Novel Blue Light Emitting Diode Using Tris(2,3-methyl-8-hydroxyquinoline) Aluminum(III) As Emitter

Improving Performance Of Deep-Blue Oled By Inserting Ultra-Thin Lif Between Hole-Blocking And Electron-Transporting Layers

Improved Hole Injection And Transport Of Organic Light-Emitting Devices With An Efficient P-Doped Hole-Injection Layer

Rational Design of Chelated Aluminum Complexes Toward Highly Efficient and Thermally Stable Electron-Transporting Materials

Preparation and Characterization of High Efficient Blue-Light Emitting Materials with a Secondary Ligand for Organic Electroluminescence

First-principle band structure calculations of tris(8-hydroxyquinolinato)aluminum.

Efficient Organic Light-Emitting Diode Using Lithium Tetra(8-Hydroxy-Quinolinato) Boron As the Electron Injection Layer

Synthesis and Luminescence Properties of Blue Organic Light-emitting Material LiBq4