Abstract:SiC-ZrC-based composite coatings on carbon/carbon composites via ZrC polymer precursor pyrolysis (PPP) plus gaseous reactive infiltration (GRI) of Si or ZrSi2, separately denoted as GSIC and GZSIC, were comparatively studied to explore the feasibility and effectiveness of GRI of ZrSi2. This composite method by applying ZrSi2 or Si was proven to similarly produce dense coatings with enhanced coating/substrate interfacial bonding strength for the formed zig-zag transition layer. Furthermore, the GRI of ZrSi2 instead of Si further increased the UHTC (ZrC) content in the as-deposited coatings resulted from the reaction of infiltrated ZrSi2 and pre-introduced graphite, enhancing the ablation resistance of the coatings for carbon/carbon composites due to the formed stable Zr-rich Zr-Si-O multiphase oxide. The average mass and linear ablation rates were-0.12 mg/s and 1.56 mu m/s for GSIC and-0.3 mg/s and-0.53 mu m/s for GZSIC specimens, respectively. The average linear ablation rate of the GZSIC specimen was decreased by similar to 134% when compared to the GSIC specimen. These results further indicate that the PPP + GRI method with metal silicide MeSi2 (Me = Zr, Ti, Hf, Cr, etc.) will contribute to the optimal fabrication of dense composite coatings with controllable microstructure, adequate evenly-distributed ultra-high temperature ceramic (UHTC) phases, enhanced interfacial bonding strength and wide circumstance suitability for potential applications. The related work is ongoing in our laboratory.

Deposit of ZrO2 Coatings on SiC Fibers by Sol-gel Method

Preparation, Performance and Influencing Mechanism of Zirconia Coating on Three-Dimensional Silicon Carbide via Sol-Gel Process

Two-step method to deposit ZrO 2 coating on carbon fiber: Preparation, characterization, and performance in SiC composites

Preparation and properties of ZrO2 coated CaO-MgO-SiO2 ceramic fiber

Oxidation Protection of Carbon Fiber by Sol-Gel Derived Boron Doped Yttria Stabilized Zirconia Coatings

Effects of Zro2 Interphase on Mechanical and Microwave Absorbing Properties of Sicf/Sic Composites

Feasibility study of ZrSiO4 as matrix and fiber interphase of SiC/SiC composite

Synthesis and Properties of a Precursor Derived Nano Zr(C, N)-carbon Composite Coating on SiC Fibers

Preparation and Characterization of Sol–gel Derived Zirconia Coated Carbon Fiber

Preparation of Zirconia Fibers via a Simple Aqueous Sol-Gel Method

Preparation and Thermal Stability of Zirconia-Doped Mullite Fibers Via Sol-Gel Method

Synthesis of Coatings on SiC Fibers and Their Effects on Microstructure and Mechanical Properties of SiCf/SiBCN Composites

Sol gel coating of nano-zircoia based ceramics on Fe-Cr-Al alloy fiber media for catalytic applications

Study of SiC-whisker-reinforced ZrO2 Ceramics Using the Sol-Gel Method

In Situ Gas–Solid Reaction and Oxidation Resistance of Silicon Carbide Coating on Carbon Fibers

Development of SiC-ZrC-based Ultra-High Temperature Ceramic Coatings Via Composite Method of Polymer Precursor Pyrolysis Plus Gaseous Reactive Infiltration

Preparation of Al2O3-ZrO2 Composite Ceramic Coating by a New Sol-gel Method and It's Structure

FABRICATION AND PROPERTIES OF SiO2/ZIRCONIUM PHOSPHATE-B2O3-SiO2 ANTI-OXIDATION COATINGS FOR Cf/SiC COMPOSITES

Preparation and characterization of continuous SiZrOC fibers by polyvinyl pyrrolidone-assisted sol–gel process

Fabrication of silicon carbide coating on mullite fiber-reinforced mullite matrix composite via dip-coating

Effects of silica on phase transformation and microstructure of zirconia fiber