Abstract:Autothermal reforming (ATR) of methane is a promising technology for low-carbon H2 production due to its high CO2 capture efficiency (>95 %) and cost advantage. Especially, reforming CO2+CH4 greenhouse gases to valuable CO+H2 gases is a feasible solution for carbon-neutral energy systems. Flame temperature, reforming gas composition and concentration, and soot loading are major factors determining the efficiency of H2 production in the subsequent catalyst region. In this study, the effects of CO2/CH4 ratio on the profiles of temperature, OH radical, light gas products, large polycyclic aromatic hydrocarbons (PAHs), and soot were investigated for CH4-CO2-O2 laminar inverse diffusion flames near ATR conditions, using the combined non-intrusive and intrusive diagnostic methods. Pure O2 as oxidizer was fed through the central nozzle of the burner surrounded by CH4 fuel diluted with CO2. The experimental results revealed that the formation of soot and PAHs was greatly suppressed with a higher CO2/CH4 ratio. The PAHs and soot loading followed exponential function as CO2/CH4 mole ratio, regardless of pressure, O2 mole fraction, and burner size. The flame height was found to increase linearly with CO2 dilution, and the high temperature region (> 1000 K) shifts downstream. The H2 production decreased with CO2/CH4 ratio, while CO production is less sensitive to CO2 dilution. The importance of radical species during soot formation is confirmed based on the comprehensive data set. Moreover, five well-known chemical-kinetic mechanisms were evaluated against experimental datasets. The comparisons indicate that the flame temperature and concentration trends of investigated species are well predicted, but future work is needed to improve the prediction accuracy of amplitude and spatial distribution, especially for C2H2, PAHs and soot. The reported experiment and simulation results can provide valuable guidance for ATR model validation, development, reduction, and application.

Study on partial oxidation of methane at short contact time

Characterization of CH4-CO2-O2 Diffusion Flames Near Autothermal Reforming Condition

Catalytic partial oxidation of methane over rhodium coated foam monolith

Simulation of Partial Oxidation of Methane on the Rhodium Coated Foam Monolith Based on the Elementary Kinetics

Milliseconds Steam Reforming of Methane Using Rh/MgO/γ-Al2O3 Catalyst

Study on direct aromatization reaction of methane: I. The reaction performance of supported Mo catalysts under oxygen-free conditions

Dry Reforming of CH4 Using a Microreactor

Reaction Mechanism and Role of the Support in the Partial Oxidation of Methane on Rh/Al2O3

Experimental Study on Non-catalytic Partial Oxidation of Methane to Acetylene and Syngas

Studies on the Performance and Structure of Supported Catalysts for the Partial Oxidation of Methane to Syngas

Direct partial oxidation of methane to methanol in a specially designed reactor

Acid-Promoted Selective Oxidation of Methane to Formic Acid over Dispersed Rhodium Catalysts under Mild Conditions

Experimental Study and Modeling Analysis of Catalytic Partial Oxidation of Methane with Addition of Co2 and H2o Using A Rh-Coated Foam Monolith Reactor

Partial Oxidation of Methane in Porous Reactor: Part I. Unidirectional Flow

Autothermal reforming of methane on rhodium catalysts: Microkinetic analysis for model reduction

Study on the Partial Oxidation Process of Methane in Liquid Phase Catalyzed by V2O5

Stability of Rh-coated Foam Monolith for Catalytic Partial Oxidation of Methane

Modeling of Non-Catalytic Partial Oxidation of Natural Gas under Conditions Found in Industrial Reformers

Analysis of catalytic partial oxidation of methane on rhodium-coated foam monolith using CFD with detailed chemistry

Partial oxidation of methane coupled with CRM and SRM in a tubular membrane reactor: a CFD simulation study

Study of Partial Oxidation and CO2 Reforming of Methane on Co Based Catalysts