Abstract:The kinetic modeling of high-temperature reforming of oxygen-free mixtures of methane with H 2 , H 2 O, CO, and CO 2 additives into synthesis gas with strong dilution with argon under conditions of variable temperature and the formation of microheterogeneous soot particles was carried out. Such mixtures are typical for biomass gasification products, in which H 2 O, CO, and CO 2 additives act as oxidizing agents. A direct comparison of kinetic calculations with the results of published experiments in a flow reactor at temperatures of 1100–1800 K, atmospheric pressure, and a reaction time of 0.68 s was carried out. The yields of soot were calculated for all test mixtures and conditions. A comparison of the results of kinetic calculations and experiments made it possible to evaluate the effect of soot formation on the reforming of methane with the additions of H 2 , H 2 O, CO, and CO 2 . The work analyzes two ways for carbon atoms to leave a reacting gas-phase system. The first way is the heterogeneous deposition of acetylene molecules from the gas phase onto the surface of the reactor with the subsequent formation of solid carbon, and the second way is the formation of microheterogeneous soot particles from nuclei in the gas phase. The paper compares the results of experiments in reflected shock waves and our kinetic calculations of the absolute concentration of CO for the process of methane oxidation in oxygen-free mixtures of methane and CO 2 . Mixtures with various CH 4 /CO 2 ratios, 90/10, 75/25, and 50/50, were studied at temperatures above 2200 K and atmospheric pressure. It has been shown that the agreement between the calculated and measured CO concentrations improved with increasing temperature and CO 2 fraction in the mixture.

Modeling of Non-Catalytic Partial Oxidation of Natural Gas under Conditions Found in Industrial Reformers

Simulation, sensitivity analysis and optimization of a continuous catalytic reforming process

Kinetic Study of Reactive Sorption-Enhanced Reforming of Coke Oven Gas for Hydrogen Production

Multi-dimensional modeling of non-catalytic partial oxidation of natural gas in a high pressure reformer

Modeling and Simulation of Commercial Catalytic Reformers

Numerical Simulation of Natural Gas Non-Catalytic Partial Oxidation Reformer

Kinetics Modeling of Non-catalytic Partial Oxidation of Natural Gas

Simulation of Non-Catalytic Partial Oxidation and Scale-Up of Natural Gas Reformer

Experimental and Kinetic Modeling Study on the Oxidation and Laminar Combustion Characteristics of Natural Gas

Oxygen-Free Reforming of Methane into Synthesis Gas in the Presence of H2, H2O, CO, and CO2 Additives Taking into Account the Formation of Soot Particles

Simulations of Methane Partial Oxidation by CFD Coupled with Detailed Chemistry at Industrial Operating Conditions

Detailed kinetic modeling of catalytic oxidative coupling of methane

Simulation of Partial Oxidation of Natural Gas with Detailed Chemistry: Influence of Addition of H2, C2H6 and C3H8

Experimental and Kinetic Study of Methanol Reforming and Methanol-Syngas Co-Oxidation at High Pressure

Preparation of Syngas from Natural Gas by Non-Catalytic Partial Oxidation

Partial Oxidation of Methane in Porous Reactor: Part I. Unidirectional Flow

Experimental study and kinetics modeling of partial oxidation reactions in heavily sooting laminar premixed methane flames

Skeletal and Reduced Kinetic Models for Methane Oxidation under Engine-Relevant Conditions

Mechanistic Insights into the Oxidative Coupling of Methane over a Li/MgO Catalyst: an Experimental and Microkinetic Modeling Study

Methane Oxidation: Experimental and Kinetic Modeling Study

Prediction and Measurement of the Product Gas Composition of the Ultra Rich Premixed Combustion of Natural Gas: Effects of Equivalence Ratio, Residence Time, Pressure, and Oxygen Concentration