Abstract:Directed relation graph with error propagation (DRGEP) method combined with extensive validation for 0D, 1D and 2D CFD modeling supported by sensitivity and Rate-Of-Production (ROP) analyses are implemented for comparative study of detailed and reduced kinetic mechanisms for CH4+ H-2 combustion. To this end, two detailed kinetic mechanisms, namely AramcoMech 2.0 and recently updated Konnov mechanism, were validated using available measurements of ignition delay times and laminar burning velocities for hydrogen, methane and hydrogen+ methane fuel mixtures. For all experimental conditions visited, both detailed mechanisms demonstrated good and close to each other performance. Two-stage DRGEP method and reaction reduction based on computational singular perturbation (CSP) were then implemented to achieve two skeletal models: 25 species and 105 reactions for AramcoMech 2.0 and 27 species and 107 reactions for the Konnov model. The conditions for skeletal models generation cover.= 0.5-2.0, temperature 900-2000 K, and pressure 1-50 bar. Turbulent non-premixed flames of CH4+ H-2 in the Jet in Hot Co-flow (JHC) burner for two different oxygen concentrations in a co-flow were modeled using both skeletal models. 2-D RANS simulations with OpenFOAM code of the flame structure using the two skeletal kinetic mechanisms are similar except for the mass fraction of OH and CO. To elucidate the differences between two skeletal mechanisms generated using the same reduction method, extensive validation for 0D, 1D and 2D CFD modeling were supported by sensitivity analysis for detailed and skeletal reaction models. Good agreement between the skeletal and detailed mechanisms was found in top reactions as well as their sensitivity coefficients, which affect auto-ignition process and laminar flame propagation. Further chemical and sensitivity analysis of the structure of laminar flames demonstrate that three important reactions, i.e. CO+ OH= CO2+ H, H-2+ OH= H+ H2O, and CH4+ OH= CH3+ H2O have different rate constants in the Aramco and Konnov models that may contribute to the differences in the prediction of CO concentration profiles. The simulation predictions for CO concentrations are improved for laminar flames and JHC flame by using a 25-species modified version in which these rate constants were taken from the Konnov mechanism. It was noted that DRGEP method applied to different detailed kinetic schemes generate skeletal models with different, non-overlapping lists of retained species. The presence of CH2CHO in the Aramco 25-species skeletal mechanism and its absence in the Konnov 27-species mechanism, and the presence of CH, CH2, CH2CO in the latter and their absence in the former mechanism were analysed and explained using Rate-OfProduction analysis for conditions found in the CFD simulations.

Skeletal and Reduced Kinetic Models for Methane Oxidation under Engine-Relevant Conditions

Skeletal Reaction Models for Methane Combustion

A Reduced Combustion Kinetic Model for the Methanol-Gasoline Blended Fuels on SI Engines

An Optimized Methane Reaction Model for Oxyfuel Combustion

Comparative Analysis of Detailed and Reduced Kinetic Models for CH4 + H2 Combustion

Optimally-reduced kinetic models for GRI-Mech 3.0 combustion mechanism based on sensitivity analysis

Skeletal CH 3 OH/NO x Kinetic Model for Simulating Spark-Ignition and Turbulent Jet Ignition Engines

Evaluation, Reduction, and Validation of a New Skeletal Mechanism for the Cofiring of NH3 and CH4

Toward Machine Learned Highly Reduce Kinetic Models For Methane/Air Combustion

Improvement on a Skeletal Chemical Kinetic Model of Iso-Octane for Internal Combustion Engine by Using a Practical Methodology

Comparison of Kinetic Mechanisms for Numerical Simulation of Methanol Combustion in DICI Heavy-Duty Engine

An augmented reduced mechanism for methane oxidation with comprehensive global parametric validation

Kinetics Modeling of Non-catalytic Partial Oxidation of Natural Gas

Reduced Chemical Model for Low and High-Temperature Oxidation of Fuel Blends Relevant to Internal Combustion Engines

Evaluation, Development, and Validation of a New Reduced Mechanism for Methane Oxy-Fuel Combustion

Numerical simulation of ammonia/methane/air combustion using reduced chemical kinetics models

A Methane Mechanism for Oxy-Fuel Combustion: Extinction Experiments, Model Validation, and Kinetic Analysis

Detailed and Reduced Chemical Kinetic Model of CH4/air Mixtures Combustion Based on High-Precision First-Principles Molecular Dynamics Simulation

A Reduced and Optimized Kinetic Mechanism for Coke Oven Gas As a Clean Alternative Vehicle Fuel

Detonation Development from a Hot Spot in Methane/air Mixtures: Effects of Kinetic Models

Enhancement on a Skeletal Kinetic Model for Primary Reference Fuel Oxidation by Using a Semidecoupling Methodology