Abstract:Abstract Experimental and kinetic modeling studies are carried out to characterize nonpremixed and premixed combustion of producer gas and mixtures of producer gas and methane. The producer gas, employed in the study, is made up of 55.00% carbon monoxide, 2.34% hydrogen, 12.72% methane, 5.24% ethene, and 24.7% carbon dioxide by mass. The primary focus is on characterizing the chemical influence of addition of producer gas on combustion of methane. The kinetic modeling studies are carried out employing a detailed chemical-kinetic mechanism, called the San Diego Mechanism, a skeletal mechanism, and a reduced mechanism made up of five global steps. Experiments on nonpremixed combustion are carried out employing the counterflow configuration. Critical conditions of extinction are measured for producer gas, methane, and mixtures of producer gas and methane. They are compared with predictions obtained using the detailed, skeletal, and reduced mechanism. Critical conditions of autoignition are measured for producer gas and compared with the predictions obtained employing the detailed mechanism. Experimental data and predictions show that with increasing amounts of producer gas in the mixture, the flame is more difficult to extinguish. Flame structures show that at a fixed value of the strain rate, leakage of oxygen from the reaction zone decreases with increasing amounts of producer gas in the combustible mixture. This is attributed to enhanced consumption of oxygen in an overall chain branching step that consumes hydrogen. Thus, the increase in the overall reactivity of the combustible mixture is attributed to presence of hydrogen in producer gas. Computations are performed, using the detailed mechanism and the skeletal mechanism, to investigate aspects of premixed combustion of stoichiometric mixtures of producer gas, methane, oxygen, and nitrogen at fixed values of adiabatic temperature. Burning velocities are calculated. They are found to be less sensitive to the amount of producer gas in the mixture. This is qualitatively different from that observed for nonpremixed combustion. It is attributed to complete consumption of all reactants including oxygen and combined influences of H 2 and CO in producer gas on overall combustion of methane. A third set of computations was performed on strained premixed flames stabilized in counterflow between a stream of a stoichiometric mixture of producer gas, methane, oxygen, and nitrogen, and a stream of nitrogen at fixed adiabatic temperature. Critical conditions of extinction were obtained. The strain rate at extinction increased with increasing amounts of producer gas. The increase was comparable to that observed for nonpremixed combustion of these fuels.

Reduced reaction mechanism for natural gas combustion in novel power cycles

Numerical Investigation of Methane Number and Wobbe Index Effects in Lean-Burn Natural Gas Spark-Ignition Combustion

An Experimental Study of the Combustion Process in a Natural-Gas Spark-Ignition Engine

A Novel Dual Fuel Reaction Mechanism for Ignition in Natural Gas–Diesel Combustion

Reduced Mechanism for Combustion of Ammonia and Natural Gas Mixtures

Dual Fuel Reaction Mechanism 2.0 including NOx Formation and Laminar Flame Speed Calculations Using Methane/Propane/n-Heptane Fuel Blends

Reactive molecular dynamics simulation and chemical kinetic modeling of ammonia/methane co-combustion

An augmented reduced mechanism for methane oxidation with comprehensive global parametric validation

Detailed Chemistry Modeling of Partial Combustion of Natural Gas for Coproducing Acetylene and Syngas

A shock-tube experimental and kinetic simulation study on the autoignition of methane at ultra-lean and lean conditions

Developing a New Skeletal Mechanism for Propane, Butane, and LPG Fuels

Comparison of methane combustion mechanisms using laminar burning velocity measurements

An Optimized Methane Reaction Model for Oxyfuel Combustion

Shock tube and modeling study of ignition delay times of propane under O2/CO2/Ar atmosphere

Investigating Auto-Ignition Characteristics and Kinetic Modeling of NH3/CH4 Mixtures Using an RCM

Reduced chemistry for a gasoline surrogate valid at engine-relevant conditions

Exploring reaction mechanism for ammonia/methane combustion via reactive molecular dynamics simulations

A reduced mechanism for the combustion of gasoline-ethanol blend on advanced engine combustion modes

Detonation Development from a Hot Spot in Methane/air Mixtures: Effects of Kinetic Models

Evaluation of Chemical Kinetic Mechanisms for Methane Combustion: A Review from a CFD Perspective

Nonpremixed and Premixed Combustion of Mixtures of Producer Gas and Methane