Abstract:Multicomponent clay and cenosphere linings protecting ceramic parts exposed to contact with liquid metal during continuous steel casting (CSC) are intended to diminish thermo-mechanical stresses at the beginning of this process. They are effective in their role, but due to their brittle nature, parts of them come off during transport or mounting. The admixture of polypropylene fibers into linings helps to alleviate problems with handling such parts, though the interaction of such a modified material with liquid steel should be re-assessed. The present experiment involved the preparation of a crucible with a ThermacoatTM (Vesuvius, Skawina, Poland) lining with the addition of BelmixTM (Belgian Fibers Group NV, Mouscron, Belgium) fibers and filling it with a drop of liquid steel. Next, the crucible was sectioned and the changes in its microstructure and phase composition were investigated with optical, scanning and transmission electron microscopy (OM/SEM/TEM) methods. This showed that the modified lining retained its non-wetting property against the steel of the non-modified material. The part with the lining, being in direct contact with the liquid steel, developed a highly porous layer filled with AlSiOx amorphous flakes with some larger blocky Al2O3 and SiO2 particles. Right below this, a heat-affected zone (HAZ) consisting of fine γ-Al2O3 platelets immersed in amorphous silica was formed. Some of the voids with a size corresponding to polymer fiber diameter carried significant carbon deposits on their walls. The performed investigation indicated that the polymer fiber-modified linings were capable of withstanding at least short-term contact with liquid steel without instantaneous defragmentation, i.e., they retained the good high-temperature properties of the non-modified material.

The Monolithic Glass-Ceramic Lined Steel Elbow Made by SHS Gravitational-Thermite Process

The Effect of the Glass Additive on the Preparation of Ceramic-lined Steel Pipe by SHS Gravitational-thermite Process

Study of Ceramic-Lined Nozzle Produced by Static Self-Propagating High-Temperature Syntheses

Hercynite-Free Ceramic Liner for Composite Steel Pipe Made Using a Self-Propagating High-Temperature Synthesis Gravitational-Thermite Process

High temperature flow behavior and constitutive model of alloy transition layer in composite steel tube prepared by centrifugal self‐propagating high‐temperature synthesis (SHS)

DENSE TiC-Al2O3-Fe CERMET FABRICATED BY SHS

Microstructure Evolution and Mechanical Behaviors of Alumina-Based Ceramic Shell for Directional Solidification of Turbine Blades

Development of weld filler material to match the advanced martensitic heat resistance steel G115 and tailoring the performance by tempering temperature

Influence of Nano SiC on Phase Composition and Properties of Inside Ceramic Lining Coating Prepared on Composite Pipes by Gravitational Separation Self-Propagation High-Temperature Synthesis

Fabrication of TiC Coating on Carbon Steel Surface by SHS/PHIP

Development of mullite-alumina ceramic shells for precision investment casting of single-crystal high-pressure turbine blades

Influence of Cro3 Additive on the Thermite Reaction Procedure in Fe2o3+Al System

Microstructure, Mechanical Properties and Corrosion of Ceramic-lined Composite Steel Pipe Prepared by Centrifugal-SHS Process

Fabrication of Single-Crystal Superalloy Hollow Blade Based on Integral Ceramic Mold

Fabrication of AlN-SiC-TiB2 Ceramics by Self-Propagating High Temperature Synthesis and Hot Isostatic Pressing

Mechanical Properties of (ti2alc+ti3alc)–tial Ceramic–intermetallic Laminate (CIL) Composites

SHS joining of TiAl intermetallics to TiB2 cermet

Brazing of Ti-coated SiC Using a CoFeCrNiCu High Entropy Alloy Filler Via Electric Field-Assisted Sintering

Enhancing Interfacial Strength of T-joint for Vacuum-Brazed Thin-Walled Structures Comprising TiAl and GH3536 Alloys Via In-Situ Synthesis of Al2TiO5 Ceramic Coatings

Microstructure and Phase Composition Changes in Polymer Fiber-Modified ThermacoatTM Lining Exposed to Contact with Liquid Steel

An ultra-strength SiC ceramic joint with an in-situ formed high-entropy carbide interlayer via diffusion bonding by spark plasma sintering