Abstract:The microstructure of BaTiO3 (BT) nanocrystals was investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), selected area electron diffraction (SAED), and (high-resolution) transmission electron microscopy [(HR)TEM]. The BT nanocrystals have a cubic perovskite structure as revealed by XRD and SAED. They were prepared by a hydrothermal method using different starting materials: (i) Using as-prepared titanium hydroxide and barium hydroxide as starting materials, BT nanocrystals were obtained with a narrow size distribution and an average grain size of 65 nm, exhibiting a spherical particle morphology and smooth surfaces. These nanocrystals showed almost uniform contrast in TEM. HRTEM lattice fringe images indicate a rather uniform, perfect crystal structure. (ii) Using barium hydroxide and titanium dioxide (anatase) as starting materials, many coarse-faceted cubic nanocrystals and a small amount of spherical particle were observed, indicating a developed bimodal size distribution. Diffraction contrast variations across these particles indicate the presence of high strain in these BT particles. The strain is probably caused by the lattice defects like OH− ions and their compensation by cation vacancies. HRTEM images demonstrated that (1 0 0) and (1 1 0) surface facets are present on these particles. In addition they revealed the presence of very small-nucleated BT islands at the edges of the faceted particles.

Hydrothermal Synthesis Of Thin Films Of Barium Titanate Nanotube Arrays

Low Temperature Hydrothermal Synthesis and Performances of Nanotube Patterned Barium Titanates Thin Films

Hydrothermal Synthesis of Tetragonal BaTiO3 Nanotube Arrays with High Dielectric Performance

Low-temperature synthesis of barium titanate thin films by nanoparticles electrophoretic deposition

General approach to well-defined perovskite MTiO3 (M = Ba, Sr, Ca, and Mg) nanostructures

Synthesis of Thin Films of Barium Titanate and Barium Strontium Titanate Nanotubes on Titanium Substrates

Sol‐Gel Routes to Nanostructured Patterned Ferroelectric Thin Films with Novel Electronic and Optical Functions

Ferroelectric Pbtio3 Nanotube Arrays Synthesized By Hydrothermal Method

Barium Titanate Tetragonal Prism Arrays: Preparation and Characterization

Well-ordered arrays of ferroelectric single-crystalline BaTiO 3 nanostructures

Fabrication and Characterization of Micropatterned Barium Titanate Ceramics

Barium Titanate Micropatterns Prepared by Electron Beam Lithography and Electrophoretic Deposition

Preparation of A Monodispersed Suspension of Barium Titanate Nanoparticles and Electrophoretic Deposition of Thin Films

Structure and Properties of Barium Strontium Titanate Nanoparticles Synthesized by A Hydrothermal Method

Hydrothermal Synthesis of Tetragonal Barium Titanate Nano-Dendrite Arrays

BaTiO3 Nanocrystals: Hydrothermal Synthesis and Structural Characterization

Structure study of single crystal BaTiO3 nanotube arrays produced by the hydrothermal method.

Template-Free Hydrothermal Synthesis of Single-Crystalline Barium Titanate and Strontium Titanate Nanowires

Preparation of Nano-Structured BaTiO3 Thin Film by Electrophoretic Deposition and Its Characterization

Formation of BaTiO3 and PbTiO3 thin films under mild hydrothermal conditions

Synthesis and Properties of Ce3+ Doped Barium Titanate Nanotube Thin Films