Abstract:Nanocrystalline barium titanate (BaTiO3, BT) was synthesized hydrothermally at 220°C by reacting barium hydroxide with titanium dioxide. The resulting BT nanopowders were characterized by X‐ray diffraction (XRD), selected area electron diffraction (SAED), Raman spectrum, scanning electron microscopy (SEM), and high‐resolution transmission electron microscopy (HR‐TEM). The BT nanopowders have a cubic phase as revealed by the XRD and SAED results, whereas the Raman spectrum indicates that tetragonal phase BT exists in the produced nanopowders but is not the dominant phase because of the weak characteristic peak of the tetragonal structure at 305 cm−1. In the SEM and TEM images, many coarse‐faceted cubic nanoparticles and a small amount of spherical particles are observed, indicating a developed bimodal size distribution of the BT powders. The variations of electron diffraction contrast across these particles in the TEM images indicate the presence of high strain in the BT nanoparticles, which is probably caused by the lattice defects like OH− ions and their compensation by cation vacancies. The HR‐TEM image of a BT nanoparticle with a size of 24 nm and a spherical morphology demonstrates a uniform and perfect crystal structure. The surrounding edges of the particle are very smooth and no surface steps are observed. However, a terrace–ledge–kink (TLK) surface structure was frequently observed at the edges of the BT nanoparticles with rough surface morphology, and in most cases the terrace and ledge lie on the {100} planes. The observed TLK surface structure can be well interpreted by the theory of periodic bond chains. Small nucleated and triangular BT islands with three to four atomic layer thickness, and their outside surfaces faceted as (100) and (010) planes, are also observed in these particles. The rarely seen {110} surface in the BT nanoparticles was found to be reconstructed so that the surface was composed of corners bound by {100} minifaces like the triangular small islands. Microstructural defects such as antiphase boundaries were also observed near the edge of a BT nanoparticle, which were formed by the intersection of two crystalline parts with displacement deviation from each other by , as revealed by the HR‐TEM images.

Barium Titanate Micropatterns Prepared by Electron Beam Lithography and Electrophoretic Deposition

Fabrication and Characterization of Micropatterned Barium Titanate Ceramics

Sol‐Gel Routes to Nanostructured Patterned Ferroelectric Thin Films with Novel Electronic and Optical Functions

Preparation of Nano-Structured BaTiO3 Thin Film by Electrophoretic Deposition and Its Characterization

Preparation of A Monodispersed Suspension of Barium Titanate Nanoparticles and Electrophoretic Deposition of Thin Films

Barium Titanate Tetragonal Prism Arrays: Preparation and Characterization

Low-temperature synthesis of barium titanate thin films by nanoparticles electrophoretic deposition

Hydrothermal Synthesis Of Thin Films Of Barium Titanate Nanotube Arrays

Atomic‐Scale Characterization of Barium Titanate Powders Formed by the Hydrothermal Process

A Facile and Eco-Friendly Hydrothermal Synthesis of High Tetragonal Barium Titanate with Uniform and Controllable Particle Size

Synthesis of Thin Films of Barium Titanate and Barium Strontium Titanate Nanotubes on Titanium Substrates

Synthesis of Micron‐Scale Platelet BaTiO3

Fabrication of barium titanate ceramics via digital light processing 3D printing by using high refractive index monomer

Fabrication of Barium Titanate Inverse Opals by Sol-Gel Electrophoretic Deposition Process

Thin Film Coating with Highly Dispersible Barium Titanate-Polyvinylpyrrolidone Nanoparticles

Bst Patterned Films Prepared by Direct Patterning Process and Their Properties

Morphology and atomic-scale surface structure of barium titanate nanocrystals formed at hydrothermal conditions

Spray‐Drying‐Assisted Digital Light Processing for Highly Dense and Precise Three‐dimensional Printed Barium Titanate Ceramic Structures

Effect of sulfur hexafluoride gas and post-annealing treatment for inductively coupled plasma etched barium titanate thin films

BaTiO3 Nanocrystals: Hydrothermal Synthesis and Structural Characterization

Structure and Properties of Barium Strontium Titanate Nanoparticles Synthesized by A Hydrothermal Method