Abstract:Dwell fatigue failure of titanium alloys has threatened flight safety for over five decades. To quantitatively evaluate the component life, experimental dwell fatigue tests are generally conducted in the lab. However, the loading profile in the lab is generally shorter than those of the realistic in-service conditions by several orders of magnitude, not only for the stress hold but also for the stress rise and fall periods. Although the dependence of fatigue life on the dwell period has been extensively studied, the effect of the rise and fall time has been ignored. Investigating such a topic is extremely time-consuming, especially when the applied stress is lower than the yield strength under the in-service loading. The fatigue tests could require years of loading when the rise and fall periods reach the order of magnitude of 103s, for example, which is experimentally infeasible. Modeling techniques provide a solution to systematically study the effect of the rise and fall on dwell fatigue responses benefit from the high computing power availability. In this study, crystal plasticity models representing equiaxed α and dual-phase α-β lamellar microstructures have been developed and used to study the effects of the rise and fall time over a wide range (10−1-103s) on the load shedding behaviors of IMI834 titanium alloy under dwell fatigue loadings. The time for the peak stress at the soft-hard grain boundary reaching equilibrium under different load profiles is quantitatively investigated. The rise and fall time have been demonstrated to influence the load shedding at different degrees. The microstructural features in the soft grains of dual-phase titanium alloys play a significant role in affecting the local stress evolutions. The correlations between the load shedding and the rise and fall time are also influenced by the microstructure. The strain partitioning between the α and β phases in the soft grains under cyclic dwell fatigue of titanium alloys has been examined to elucidate the underlying mechanisms of the rise/fall time dependence.

High cycle fatigue properties and microstructure of zirconium and zircaloy-4 under reversal bending

Low Cycle Fatigue Behavior and Deformation Mechanisms of Zirconium and Zircaloy-4

HIGH CYCLE FATIGUE BEHAVIOR OF COMMERCIAL PURITY ZIRCONIUM UNDER CYCLIC REVERSED BEND LOADING

Low cycle fatigue properties and microscopic deformation structure of Zircaloy-4 in recrystallized and stress-relieved conditions

Microscopic Characterization on Low Cycle Fatigue Behavior at Room Temperature of Zircaloy-4 Alloy with Recrystallized Microstructure

Cyclic deformation behavior of zircaloy-4 at different temperatures

Dislocation Structures in Zirconium and Zircaloy-4 Fatigued at Different Temperatures

On the mechanism of zircaloy-4 fatigue-deformation under different heat-treatment conditions

Plastic Energy Dissipation Model for Lifetime Prediction of Zirconium and Zircaloy-4 Fatigued at RT and 400°C

Micro-scale mechanism for cyclic deformation behavior in Zirconium under low-cycle-fatigue loading

Biaxial low cycle fatigue properties and dislocation substructures of zircaloy-4 under in-phase and out-of-phase loading

Fatigue dislocation configurations in hexagonal Zircaloy-4

Biaxial low cycle fatigue lifetime evaluation of zircaloy-4

Quantitative characterization of short fatigue crack and grain boundary interaction behavior in zirconium

Biaxial Low Cycle Fatigue Properties of Zircaloy-4 under Tension-Torsional Proportional Loading

Fatigue-induced HCP-to-FCC Phase Transformation Assisting Crack Nucleation of Pure Zirconium in High Cycle Fatigue Regime

Effect of test temperature on low cycle fatigue behavior of zircaloy-4

The Roles of Rise and Fall Time in Load Shedding and Strain Partitioning under the Dwell Fatigue of Titanium Alloys with Different Microstructures

Low Cycle Fatigue Behavior and Crack Initiation Mechanism of Ni-based Single Crystal Curved Thin-Walled Blade Simulator Specimen with Film Cooling Holes

Low Cycle Fatigue Failure Analysis of a Ni‐Based Single Crystal Superalloys at 850 °C

Fatigue-Induced HCP-to-FCC Phase Transformation Resulting in Two FCC-Zr Variants in Pure Zirconium