Abstract:The effect of cold rolling and annealing on texture development and mechanical behavior of Zircaloy-4 alloy plates was systematically investigated in the present work. The as-received plates were subjected to cold rolling with thickness reductions of 33% and 66%. Electron back-scatter diffraction and tensile tests were performed to reveal the texture and mechanical properties, respectively. Results showed that a bimodal texture was featured in the as-received plate and the texture was a fiber that spread from <<math>101¯0</math>> to <<math>112¯0</math>>. After cold rolling and annealing, a fiber with a continuous distribution from <<math>101¯0</math>> to <<math>112¯0</math>> and a fiber with a maximum at the <<math>112¯0</math>> position were present in the plates with thickness reductions of 33% and 66%. Besides, the existence of {<math>0001</math>} basal fiber was noticed, indicating more basal poles oriented toward the normal direction. Tensile tests showed that the recrystallized plate with 66% thickness reduction was more ductile and less strong than that with 33% reduction. Meanwhile, tensile properties were sensitive to strain rate, loading direction and thickness reduction. Moreover, the relationship between texture development and yield strength was discussed based on Schmid theory. Calculated results indicated that prismatic <a> slip was the predominant deformation mode and its Schmid factor values under different loading directions contributed to the anisotropy of yield strength. Due to the texture development during cold rolling and annealing, the averaged SF values for prismatic <a> slip changed with the increased thickness reduction, resulting in the variation of yield strength.</a></a>

On the mechanism of zircaloy-4 fatigue-deformation under different heat-treatment conditions

Deformation mechanism and cyclic stress response of Zircaloy-4 alloy cladding tube during low cycle fatigue at room temperature

Hot deformation behaviour of Zircaloy-4 at varying strain rate and its microstructural evolution

Influence of Strain Amplitude on Low-Cycle Fatigue Behaviors of a Fourth-Generation Ni-Based Single-Crystal Superalloy at 980 °C

In-situ EBSD analysis of hydride phase transformation and its effect on micromechanical behavior in Zircaloy-4 under uniaxial tensile loading

Micro-scale mechanism for cyclic deformation behavior in Zirconium under low-cycle-fatigue loading

Texture development and mechanical behavior of Zircaloy-4 alloy plates fabricated by cold rolling and annealing

Characterisation of microstructural creep, strain rate and temperature sensitivity and computational crystal plasticity in Zircaloy-4

Effect of uniaxial loading direction on mechanical responses and texture evolution in cold pilgered Zircaloy-4 tube: Experiments and modeling

Deformation Behavior and Constitutive Model for Isothermal Compression of TC4 Alloy

Revealing the role of hydrogen content on the mechanical behavior and cracking mechanisms of Zircaloy-4 under strain

Effects of deformation parameters and stress triaxiality on the fracture behaviors and microstructural evolution of an Al-Zn-Mg-Cu alloy

Research On The Cyclic Fatigue Behavior Of Zirconia Ceramics At The Room Temperature

Effect of cold Pilger rolling followed by annealing on fatigue crack initiation in Zircaloy-4 alloy cladding tube

Flow Behaviors and Dynamic Recrystallization Mechanisms Study of TC4 under Different Temperatures and Strain Rates

Recrystallization behavior of an Al-Zn-Mg-Cu alloy during hot deformation and subsequent heat treatment

Hot Deformation Behavior and Microstructure Evolution of High-Strength Al-Zn-Mg-Cu Alloy

Deformation mechanisms of low cycle fatigue of a fourth generation Ni-based single crystal superalloy

Low cycle fatigue behavior of precipitation-strengthened Cu-Cr-Zr contact wires

Cyclic deformation behaviors and microstructure evolution mechanisms of 42CrMo steels under different heat-treatment states

Deformation behavior and microstructure evolution of 7050 aluminum alloy during high temperature deformation