Abstract:Zr and its alloys are considered as strategic materials for nuclear industry. In nuclear industries, zirconium and its alloys are mostly used to manufacture the tubes for reactors. The properties of the end component i.e. tube is fully dependent on the material processing route and the final microstructure. Therefore, in the present review paper, brief description of zirconium and its alloys is provided, bringing in the effect of various phase stabilizers and the microstructures after processing. Additionally, the processing route of Zr and Zr–Nb alloys are explained in terms of primary and secondary processing. In primary processing, the production of usable shapes is obtained through ingot melting followed by secondary operations such hot rolling or forging. Further, optimization of mechanical properties can be done by controlling the microstructure using various thermo-mechanical processes. The secondary processing such as cold working and/or annealing also helps to control the final microstructure to large extent. The microstructure control is fully dependent on the dominant deformation mechanism during the hot deformation. The dominant deformation mechanism depends on relative ease with which following processes occur; dislocation generation and glide, cross slip and climb and, diffusion. The possible restoration mechanisms for different Zr-alloys are discontinuous dynamic recrystallization (DDRX), continuous dynamic recrystallization (CDRX), rotational recrystallization (RRX), geometric dynamic recrystallization (GDX), dynamic recovery (DRV) accompanied by grain growth (GG). There are various techniques which helps to understand the hot deformation behaviour of any material. These techniques are; analysis of stress–strain data, development of processing maps, development of constitute equation. At the end, present paper summarises the work related to processing map, findings of processing map in terms of safe processing parameter, dominant deformation mechanism, role of activation energies during deformation of Zr–Nb alloys and their different phases (i.e. single α or β phase, or two phase α + β).Graphic

Hot deformation behaviour of Zircaloy-4 at varying strain rate and its microstructural evolution

Low Cycle Fatigue Behavior and Deformation Mechanisms of Zirconium and Zircaloy-4

Low cycle fatigue properties and microscopic deformation structure of Zircaloy-4 in recrystallized and stress-relieved conditions

Hot Deformation and Processing Map of As-Homogenized Mg–9Gd–3Y–2Zn–0.5Zr Alloy

On the mechanism of zircaloy-4 fatigue-deformation under different heat-treatment conditions

Zr–Nb Alloys and Its Hot Deformation Analysis Approaches

Hot Deformation Behavior and Microstructure Evolution of a Novel High-Zn Containing Al-Zn-Mg-Cu-Zr Alloy

Flow Behavior and Microstructural Evolution of ZW61 Alloy During Hot Compressive Deformation

High Strain Rate Deformation Behavior of Zirconium at Elevated Temperatures

Microstructure and High Temperature Deformation Behavior of the Mo-ZrO 2 Alloys

Hot Deformation Behavior and Microstructure Evolution of High-Strength Al-Zn-Mg-Cu Alloy

Characterization of Hot Deformation Behavior and Processing Maps of Homogenized Al-Mg-Si-Sc-Zr Alloys

High- and Low-Temperature Deformation Behavior of Different Orientation Hot-Rolled Annealed Zircaloy-4

Hot Deformation Behavior, Processing Maps and Microstructural Evolution of the Mg-2.5Nd-0.5Zn-0.5Zr Alloy

Hot Deformation Behaviour and Constitutive Equation of Mg-9Gd-4Y-2Zn-0.5Zr Alloy

Microstructural and mechanical property evolution of a nuclear zirconium-4 alloy fabricated via laser powder bed fusion and annealing heat treatment

Study of Oxidation Behavior and Associated Microstructure Evolution of Zircaloy-4 Exposed to High Temperature Pure Steam

Microstructure Evolution of Zircaloy-4 During Ne Ion Irradiation and Annealing: an in Situ TEM Investigation

Experimental evaluation of orientation and temperature dependent material stress-strain curves of Zr2.5%Nb Indian pressure tube material and development of a suitable anisotropic material model

Characterization of surface coarse-grained structure and improved corrosion resistance for Zr-4 alloy at high temperature

In-situ EBSD analysis of hydride phase transformation and its effect on micromechanical behavior in Zircaloy-4 under uniaxial tensile loading