Abstract:Buckling of concentric tubular strings in pipe is an essential problem in the fields of medical, biological, and nanomaterials, especially in petroleum engineering. Completely different from the buckling of the classic Euler compression columns, the buckling of concentric tubular strings involves geometric nonlinearity and contact nonlinearity, and has more complicated geometric deformations and buckling configurations. In this paper, a finite element method combining the spatial beam element and the two-layer contact gap element is proposed, and a virtual transient dynamic method is introduced to solve the static buckling of concentric tubular strings. The internal concentric tubular strings are discretized into spatial beam elements, and the contact relationships between tubular strings are described by two-layer contact gap element. Meanwhile, the larger damping is used to attenuate the dynamic response of the system, so as to find the static part of the transient dynamic solution. Appropriate damping and element length are determined by numerical simulation. The structural characteristics and contact states of eight post-buckling configurations are studied. The helix pitch values of specific configurations are in good agreement with the theoretical solutions. In addition, the distribution of bending moment, shear force and contact force in various post-buckling configurations is studied. For the full helical buckling, it is found that there is only one non-contact section in the transition section of inner tube and two non-contact sections in the transition section of middle tube. The research results of this paper provide a theoretical basis and reference for further study on the buckling of multi-layer concentric tubular strings.

Contact stress analysis of two unequal-length interference-fit tubes by axisymmetric boundary element method

Experimental study and capacity analysis of double-tapered rectangular steel tubes

EXPERIMENTAL RESEARCH AND FINITE ELEMENT ANALYSIS ON A WELDED JOINT WITH TUBES INTERSECTED AT TWO DIFFERENT POINTS

Load-carrying capacity of welded hollow spherical joints subject to combined planar tri-directional axial force and bending moment

Element Stiffness Matrix and Modified Coefficients for Circular Tube with Tapered Ends

Finite Element Analysis of Tangential Rectangle Joint Pipe on the Shell of an Cyclone

Theoretical and Experimental Study on Load-Carrying Capacity of Combined Members Consisted of Inner and Sleeved Tubes

Finite Element Analysis on the Mechanical Properties of the Combined Fittings With a Long Radius and Double Elbows

Post-buckling analysis of two-layer contact concentric tubular strings in pipe

Alternative analytical and finite element models for unbonded flexible pipes under axisymmetric loads

Residual stresses analysis for actual material model of autofrettaged tube by non-linear boundary element method

Novel finite element model of analyzing wall thickness during tube drawing considering raw tube's thickness non-uniformity and die misalignment

Investigation on bearing resistance of thin-walled circular steel tube subjected to eccentric loading

Mechanical behavior of thin tubes under combined axial compression and bending

Finite element analysis of locally strengthened stainless-steel tube under lateral impact loading

Analytical Model for Tube Hydro-Bulging Test, Part I: Models for Stress Components and Bulging Zone Profile

Analysis and Finite Element Simulation of the Tube Bulge Hydroforming Process

Nonlinear Analysis of the Axial Performance of Concrete Filled Stiffened Thin-Walled Steel Tubes

Nonlinear Analysis on Ultimate Flexural Bearing Capacity of the N-Shaped Steel Tubular Joints

Mechanical analysis of finned special-shaped tubes in bending-torsional coupling deformation

Axial Stress Analysis for the Hydro Bending Process of Double-Layered Tube