Abstract:Autofrettage processes are designed to strengthen hollow cylindrical and spherical parts and usually consist of one load-unload cycle. At the first stage, the workpiece is loaded to cause either partial or complete plastic deformations. During unloading, residual compressive stresses are formed in the vicinity of the inner surface of a part. The present work is devoted to a theoretical study of the process of rotational autofrettage of a hollow cylinder with fixed ends. The formulation of the problem is based on the theory of infinitesimal elastoplastic deformations, the Tresca plasticity condition and the flow rule associated with it. It is assumed that at the loading stage the cylinder material follows the linear-exponential law of isotropic hardening, and when unloaded it behaves as purely elastic body. The effect of a decrease in Young's modulus during unloading as a result of preliminary plastic deformation and its influence on residual stresses caused by rotational autofrettage of the cylinder are studied. To quantitatively describe the variation in Young's modulus, an exponential model with saturation is used. For the load stage, an exact analytical solution is obtained based on the Lambert W-function. Calculation of residual stresses in the cylinder is performed using the Runge-Kutta method. As an example, materials with significant decrease in Young's modulus are considered, namely aluminum alloy AA6022, steel DP980 and manganese steel. It has been established that taking into account the variable Young's modulus can lead to a significant reduction in the calculated level of residual stresses. This effect is especially important for the calculation of thick-walled cylinders and fairly high autofrettage velocities.

Residual stresses analysis for actual material model of autofrettaged tube by non-linear boundary element method

Modelling of Concrete-Filled Filament-Wound FRP Confining Tubes Considering Nonlinear Biaxial Tube Behavior

Effect of Bauschinger Effect and Yield Criterion on Residual Stress Distribution of Autofrettaged Tube

A New Autofrettage Model of Thick-Walled Cylinder Considering the Strain-Hardening and Bauschinger Effect of Material

Determination of Residual Stress Distribution in Autofrettaged Tube Based on Modified Yielding Criterion and Tensile-Compressive Curve of Material

Residual Stress in an Autofrettaged Tube Taking Bauschinger Effect As a Function of the Prior Plastic Strain

Fine analysis of section stress of steel strand

Residual Stress Analysis of Re-autofrettage of a Swage-Autofrettaged Tube by Computer Modeling Incorporating Accurate Material Representation

Solving The Elastoplastic Unloading Problems Of An Axisymmetrical Body With Actual Material Hardening Models By Bem

Analysis of residual stress field in strain-hardened hollow circular discs subjected to autofrettage by radial temperature difference

A General Autofrettage Model of a Thick-Walled Cylinder Based on Tensile-Compressive Stress-Strain Curve of a Material

On the unloading solution by viscoplastic BEM of axisymmetric pressure vessels with three material hardening models

Comparative Study and Application of a Coupled Nonlinear Kinematic Hardening Model for Structural Metallic Material Behavior

Application of autofrettage theory in the design of linear strengthening material combined die

Evaluation of Anisotropic Constitutive Models: Mixed Anisotropic Hardening and Non-Associated Flow Rule Approach

Elastoplastic Mechanical Properties and Kinematic Hardening Model of 35CrNi3MoVR

Mechanical Modeling of Tube Bending Considering Elastoplastic Evolution of Tube Cross-Section

INFLUENCE OF VARIABLE YOUNG’S MODULUS ON RESIDUAL STRESSES INDUCED BY ROTATIONAL AUTOFRETTAGE OF A TUBE WITH FIXED ENDS

Nonlinear Analysis of the Axial Performance of Concrete Filled Stiffened Thin-Walled Steel Tubes

Development of Combined Hardening Model for the Metal Material under Cyclic Loading

Laminated tubes model for non-linear analysis on concrete filled steel tubes under combined action of axial force and torsion