Abstract:The relationship between von Mises equivalent stress <math>σ¯</math> and equivalent plastic strain <math>ε¯</math> (PEEQ), termed as von Mises stress-strain, plays an important role in numerical simulations for ductile fracture of structural metallic materials with large plastic strain. The standard uniaxial tensile test on cylindrical specimens is the most straightforward method to derive the (<math>σ¯−ε¯</math>) data. However, the distribution of the stress and strain along the necking section of the tensile specimen is no longer uniform in the post-necking process, which induces difficulty in acquiring the (<math>σ¯−ε¯</math>) data. The existing correction methods to identify von Mises stress-strain in the post-necking regime need instantaneous geometry of the notched region and ignore influence of the initial geometry of the specimen, which induces these methods are inconvenient for application and inapplicable for circumferentially notched tensile specimens to determine (<math>σ¯−ε¯</math>) of each individual material zone in a hybrid coupon (e.g. weldment). In the present study, influences of initial geometry of the specimen and plastic hardening property of material on necking process are investigated firstly. It is found that the shrinking behavior of the minimum cross-section of the specimen is determined by the geometric parameter of specimen and plastic hardening exponent of materials. Based on an extensive parametric study a modified power law function to characterize the von Mises stress-strain curve from tensile tests on circumferentially notched specimens without measuring instantaneous geometry of cross-section is proposed.

Fine analysis of section stress of steel strand

Static model and cross section characteristic analysis of steel strand

Theoretical Analysis and Experimental Study on Sensitivity of Element-Length Error in Cable-Strut Tensile Structures

A Modified Coffin-Manson Model for Ultra-Low Cycle Fatigue Fracture of Structural Steels Considering the Effect of Stress Triaxiality

PERFORMANCE RESEARCH ON LARGE CAST-STEEL NODE UNDER COMPLEX STRESS STATE

FINITE ELEMENT ANALYSIS OF STIFFENED T-STUB CONNECTIONS

AN INSIGHT INTO FORMULAS FOR PREDICTING THE LOCAL BEARING STRESS IN WEBS OF CRANE RUNWAY BEAMS

ANALYSIS OF TWISTING ABOUT UPPER FLANGE OF C-SECTION PURLIN WITH TWO SAG RODS

Finite Element Analysis of Structural Hot-Spot Stress for Orthotropic Steel Bridge Deck

Study on the working mechanism and behavior of centrifuge concrete filled-steel tubular(CCFT) members subjected to torsion

Residual stress model of welded steel L-shaped and T- shaped sections

Experimental Study and Modeling of Residual Stresses of Q420 Large-Section Angles

Finite Element Thermal-Mechanical Coupled Analysis of Strand Bulging Deformation in Continuous Casting

Fatigue behavior of typical details of orthotropic steel bridges in multiaxial stress states using traction structural stress

Finite Element Analysis on Stress Distribution on Section of Steel Columns Reinforced by Welding under Load

NONLINEAR FINITE ELEMENT ANALYSIS OF END-PLATE CONNECTIONS IN STEEL FRAMES

Stressing State Analysis On A Single Tube Cfst Arch Under Spatial Loads

Mechanical Analysis of Stress Distribution in a Carbon Fiber-Reinforced Polymer Rod Bonding Anchor

Simplified method to identify full von Mises stress-strain curve of structural metals

EXPERIMENTAL AND UNIFIED MODEL INVESTIGATIONS ON RESIDUAL STRESS WITHIN HIGH STRENGTH STEEL WELDED I-SECTIONS

Stress analysis for composite connections with medium-high strength steel under reciprocal load