Abstract:In recent decades, concrete-filled steel tube (CFST) arch bridges have been widely constructed in China. With the increasing span and arch rib diameter of CFST arch bridges, the hydration heat of pumped mass concrete in the CFST arch causes greater temperature changes during the period of construction, leading to potential thermal stress-induced cracking of mass concrete enclosed in the steel tube. In this paper, a finite element model was established to simulate the hydration Heat transfer process of large-meter CFST arch which was compared with the measured data from the literature. Subsequently, the variation of thermal stress during hardening process was revealed combining with numerical implementation and analytical study, and there is a reasonable agreement between the analytical solutions and those obtained by numerical implementation. In addition, the effect of concrete creep on the thermal stresses due to hydration heat was taking into account in the calculation based on the relaxation coefficient method. The results show that the nonlinear temperature field generated from the hydration heat determines the nonlinear variation of the thermal stress of CFST structure during hardening process. The thermal stress increases rapidly at the beginning of the concrete hydration, and there is a large stress gradient along the radial direction of the arch cross section; the stress slowly decreases after peak, and there is residual thermal tensile stress in the concrete after the heat release. Concrete creep significantly reduces the thermal stress of the concrete in the early age, but the effect on the thermal stress of the steel tube is negligible.

Stressing State Analysis On A Single Tube Cfst Arch Under Spatial Loads

Numerical Analysis of Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges

Case Study on Stability Performance of Asymmetric Steel Arch Bridge with Inclined Arch Ribs

Investigation On Single Tube Cfst Arch Models By Modeling Structural Stressing State Based On Nsf Method

Approach for Analyzing the Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges with Stiffening Girder

Finite-element Analysis for Nonlinear Stabilities of Concrete-filled Steel Tubular Arch Bridges

AN INVESTIGATION INTO WORKING BEHAVIOR CHARACTERISTICS OF PARABOLIC CFST ARCHES APPLYING STRUCTURAL STRESSING STATE THEORY

Stressing State Analysis Of Cfst Arch Supports In Deep Roadway Based On Nsf Method

STUDY FOR IN-PLANE ULTIMATE STRENGTH OF STEEL CIRCULAR ARCHES WITH HORIZONTAL SPRING SUPPORTS

Parametric Study of In-Plane Ultimate Bearing Capacity of CFST Truss Rib Arch Bridge

Essential Working Characteristics of Concrete-Filled Steel Tubular Arch Supports Discovered by Modeling Experimental Strains

Simulation Analysis of Thermal Stress of CFST Arch Bridge During Exothermic Hydration Process

Stressing State Analysis of an Integral Abutment Curved Box-Girder Bridge Model

Stressing state analysis of large curvature continuous prestressed concrete box-girder bridge model

Probabilistic Analysis of Stress Concentration Factor of an Orthotropic Steel Bridge with FBG-Based Structural Health Monitoring System *

A method for stress concentration factor determination of welded steel bridge T-joints under moving load

Stressing State Analysis of Multi-Span Continuous Steel-Concrete Composite Box Girder

Experimental Investigation into In-plane Stability of Concrete-Filled Steel Tubular Parabolic Arches under Five-Point Concentrated Loads

Experimental Evaluation of Stress Concentration Factor of Welded Steel Bridge T-Joints

Experimental and numerical study on slender concrete-filled steel tubular arches subjected to tilting loads

NSF-Based Analysis of the Structural Stressing State of Trussed Steel and a Concrete Box Girder.