Optimization of the Synchronous Pressurization Process for the Elimination of Double-Layer Oxide Film Defects
Ziao Qiu,Chaojun Zhang,Zhishuai Jin,Guanyu Cao,Lunyong Zhang,Sida Jiang,Fuyang Cao,Hongxian Shen,Xinyi Zhao,Heqian Song,Jianfei Sun
DOI: https://doi.org/10.3390/machines12100702
IF: 2.899
2024-10-03
Machines
Abstract:The counter-pressure casting (CPC) process has the technical advantages of smooth filling and solidification under pressure, which is conducive to obtaining high-quality castings. In the counter-pressure casting process, the way of fixed solenoid valve opening is used for synchronous pressurization at present. However, this synchronous pressurization method causes the melt to rise first in the transfer tube and then fall back. The falling process of the melt will lead to the formation of the double-layer oxide films on the melt surface. In the subsequent pouring stage, part of the double-layer oxide films will enter the inside of the casting to form defects. To solve this problem, the synchronous pressurization process was optimized. Combined with numerical simulation and measurement results, the influence of two kinds of processes on melt rise behavior in transfer tubes before and after optimization is compared. The optimized process can reduce the rise height of melt by about 90% in the process of synchronous pressurization and change the flow behavior of melt so that the melt is always filled forward and the fall of melt is eliminated. Furthermore, the formation of double-layer oxide films in the melt during synchronous pressurization is eliminated.
engineering, mechanical, electrical & electronic