Abstract:To improve the casting quality as well as the casting efficiency during the casting process, the effect of the interaction of process parameters and system structural parameters on the shrinkage volume and efficiency of the casting was investigated in this paper by using the response surface method for the simulation prediction of A356 alloy sand casting. The relationship between variables and response (shrinkage volume, solidification time) was established by Box-Behnken Design with pouring temperature (650–710 °C), mold preheating temperature (200–300 °C), width/thickness ratio of cross-section of sprue (1.2–1.5), width/thickness ratio of inner sprue section (2–4) and length/diameter ratio of straight sprue (1.5–2.5) as variables by the response surface method. The results are then optimized, and the optimal solution is selected by the NSGA-II algorithm and TOPSIS method. The results show that the changes in the cavities of the optimized and improved pouring system enhance the flow of the metal fluid and make the filling more complete. The gentle cooling of temperature is conducive to heat dissipation and layer-by-layer sequential solidification, which can effectively eliminate the casting's internal shrinkage loosening and shrinkage holes defects, thus forming a dense casting with good performance. After solving the optimized parameters and improving the pouring system, the solidification time (integrated solidification time) was reduced from 129.24 to 88.10s, and the shrinkage volume was reduced from 9.68 to 4.06 cm 3 .

Design and Optimization of Casting Technology for Steel Beam

Simulation Analysis of Thermal Stress During Casting Process of Large-Sized Alloy Steel Ingot

Numerical Simulation and Optimization of Indirect Squeeze Casting Process

Optimization of Valve Body Process Based on HZCAE

Die Structure Optimization of Aluminum Alloy Wheel Low-Pressure Die Casting Based on CAE

Optimization of V-Process for Cast-Iron Boiler Plate

Research and Application of Foundry CAD/CAE System

Simulation and Optimization of Casting Technique on Upper Beam of 80MN Rapid Forging Press

Optimization of Casting System Structure Based on Genetic Algorithm for A356 Casting Quality Prediction

Determination of casting parameters of thick wall die-casting of magnesium alloy and simulation of its processing

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

Computer Aided Analysis on the Foundry Technology of Large Scale Mill House

Technology Analysis and Optimization for KU-1004 Casting Based on ProCAST

Study on numerical simulation of mold-filling and solidification processes of shaped casting

Thermo-mechanical simulation and parameters optimization for beam blank continuous casting

The Optimization of Marine Diesel Chain Wheel′s Foundry Technology by Numerical Simulation and Its Trial Manufacture

Numerical Simulation and Optimization of Investment Casting for Complex Thin-walled Castings

Cooling Control for Castings by Adopting Skeletal Sand Mold Design

Low pressure casting technology and forming process analysis of metal mold based on ProCAST FEA procedure

Progress in numerical simulation of solidification process of shaped casting

Three-dimensional FEM Study of Fluid Flow in Mould for Beam Blank Continuous Casting: Influence of Nozzle Structure and Parameters on Fluid Flow