Abstract:Resin chemistries for dental composite are evolving as noted by the introduction of silorane-based composites in 2007. This shift in the landscape from methacrylate-based composites has fueled the quest for versatile methacrylate-silorane adhesives. The objective of this study was to evaluate the polymerization behavior and structure/property relationships of methacrylate-silorane hybrid systems. Amine compound ethyl-4-(dimethylamino) benzoate (EDMAB) or silane compound tris(trimethylsilyl) silane (TTMSS) was selected as coinitiators. The mechanical properties of the copolymer were improved significantly at low concentrations (15, 25, or 35 wt %) of silorane when EDMAB was used as coinitiator. The rubbery moduli of these experimental copolymers were increased by up to 260%, compared with that of the control (30.8 +/- 1.9 MPa). Visible phase separation appeared in these formulations if the silorane concentrations in the formulations were 50-75 wt %. The use of TTMSS as coinitiator decreased the phase separation, but there was a concomitant decrease in mechanical properties. In the neat methacrylate formulations, the maximum rates of free-radical polymerization with EDMAB or TTMSS were 0.28 or 0.06 s(-1), respectively. In the neat silorane resin, the maximum rates of cationic ring-opening polymerization with EDMAB or TTMSS were 0.056 or 0.087 s(-1), respectively. The phase separation phenomenon may be attributed to differences in the rates of free-radical polymerization of methacrylates and cationic ring-opening polymerization of silorane. In the hybrid systems, free-radical polymerization initiated with EDMAB led to higher crosslink density and better mechanical properties under dry/wet conditions. These beneficial effects were, however, associated with an increase in heterogeneity in the network structure. (c) 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 104B: 841-852, 2016.

Organic–inorganic Hybrids Derived from 2-Hydroxyethylmethacrylate and (3-Methacryloyloxypropyl)trimethoxysilane

Sol–gel Derived Composites from Poly(silicic Acid) and 2-Hydroxyethylmethacrylate: Thermal, Physical and Morphological Properties

Chemical Structure of Composites Derived from Poly(silicic Acid) and 2‐Hydroxyethylmethacrylate

Synthesis, Characterization and Thermal Properties of Some Organic-inorganic Hybrid Composites

Mechanical Properties of Interface‐free Polyacrylate‐silica Hybrid Sol–gel Materials for Potential Dental Applications

Sol–gel derived organic–inorganic hybrid from trialkoxysilane-capped acrylic resin and titania: effects of preparation conditions on the structure and properties

Development of Methacrylate/Silorane Hybrid Monomer System: Relationship Between Photopolymerization Behavior and Dynamic Mechanical Properties

Study on Poly(butyl Methacrylate)/silica-Titania Hybrid Materials

Morphology and Thermomechanical Properties of Organic−Inorganic Hybrid Composites Involving Epoxy Resin and an Incompletely Condensed Polyhedral Oligomeric Silsesquioxane

Effect of MSU-J and Organic Modification on Mechanical and Thermal Properties of PMMA Hybrid Material

Preparation and thermal properties of novel organic/inorganic network hybrid materials containing silicon and phosphate

Acrylic‐Based Polyurethane/Silica Hybrids Prepared by Acid‐Catalyzed Sol–Gel Process: Structure and Mechanical Properties

Study on fluoro-acrylate polymer/SiO2 hybrids prepared by sol-gel process

Synthesis and Characterization of PMMA-ZrO2 (SiO2, TiO2, Al2O3) Organic-Inorganic Hybrid Materials

Synthesis, structural and morphological characteristics of (P(MA-MPTMS)/SiO2 hybrid nanocomposites

PREPARATION OF ACRYLIC RESIN/TiO2 ORGANIC-INORGANIC HYBRID BY SOL-GEL PROCESS AND CHARACTERIZATION OF ITS STRUCTURE

Characterization of Poly(2-Hydroxyethyl Methacrylate-Silica) Hybrid Materials with Different Silica Contents

Preparation and Characterization of Organic–inorganic Hybrid Composites Based on Multiepoxy Silsesquioxane and Cyanate Resin

Study of Microstructure and Properties of HEC-g-AA/SiO2 Organic-Inorganic Hybrid Materials

Structure–property Behavior of UV‐curable Polyepoxy–acrylate Hybrid Materials Prepared Via Sol–gel Process

Study on Mechanical, Thermal and Optical Properties of Acrylic Resin/TiO2 Organic-inorganic Hybrid Materials