Abstract:Complex coupling agents system with two kinds of functional, crosslinked groups(-NH2 and -C=C-) are employed for the first time to generate crosslinked structures in the formation of inorganic-organic interpenetrating polymer networks(IPNs) composed of methyl methacrylate-co-maleic anhydride copolymer and silica polymer formed by hydrolysis of tetraethoxysilane via radical polymerization and sol-gel method of two networks. The polymerization process, morphology and the mechanical properties of hybrids are studied by FTIR, TEM, transparency, TG-DTA and stress-strain curve detection. The results indicate that the component ratio has effect to the transparent and mechanical properties of hybrids. The FT-IR detection results proved the formation of crosslink structures between two networks. The TEM observation results indicate that the introduction of covalent bond can control the phase separation of hybrid within 20nm and thus obtain hybrids with higher transparency(above 85%). The mechanical property detection results show that thermal resistance, elastic modulus and tensile strength are all improved by the interpenetration of inorganic phase into hybrid compared with pure organic components.

Structure–property Behavior of UV‐curable Polyepoxy–acrylate Hybrid Materials Prepared Via Sol–gel Process

Characterization and Properties of UV‐curable Polyurethane‐acrylate/silica Hybrid Materials Prepared by the Sol‐gel Process

Synthesis and Characterization of Novel Ultraviolet‐curing Polyurethane Acrylate/epoxy Acrylate/sio2 Hybrid Materials Via Sol–gel Reaction

Preparation of UV-curable Nano-composite Coating by the Sol-Gel Process

Study on UV-curable Polyurethane-acrylate Hybrid Materials Prepared by Sol-gel Process

Improvement of Epoxy Resin with Glycidyl-Polyhedral Oligomeric Silsesquioxanes

Acrylic‐Based Polyurethane/Silica Hybrids Prepared by Acid‐Catalyzed Sol–Gel Process: Structure and Mechanical Properties

Preparation of UV-Curing Polyurethane Acrylate/Epoxy Acrylate/SiO_2 Hybrid Materials by Sol-Gel Method

Preparation of Epoxy-Silica-acrylate Hybrid Coatings

On preparation and properties of G-POSS/CE hybrid materials

Study on Epoxy Resin/SiO2 Hybrid Materials Prepared by Sol-Gel Method

Preparation and Properties Study of G-POSS/EP Hybrid Materials

Preparation And Properties Of Epoxy/Amine Hybrid Resins From In Situ Polymerization

Study on Mechanical, Thermal and Optical Properties of Acrylic Resin/TiO2 Organic-inorganic Hybrid Materials

Study on fluoro-acrylate polymer/SiO2 hybrids prepared by sol-gel process

Synthesis and Characterization of Epoxy/polysiloxane Hybrid Materials

Study on Preparation of SiO2/Epoxy Resin Hybrid Materials by Means of Sol-Gel

Studies on Epoxy-acrylate Hybrid UV-cure System

High-Performance Silica/Epoxy Resin Hybrid Materials Prepared by In-Suit Sol-Gel Process

Mechanical Properties and Morphology of Organic Silicon/Polyurethane Ipns Prepared by Sol-Gel Method

Preparation and characters of hyperbranched polyester-based organic-inorganic hybrid material compared with linear polyester