Preparation of α-Al2O3 Hollow Fiber Composite Membranes Used in Separation of Methanol-Water Solution

Huixin Zhang,Yue Cao,Xiaohua Ma,Zhenliang Xu

DOI: https://doi.org/10.3969/j.issn.1000-8144.2013.04.007

2013-01-01

Abstract:α-Al2O3hollow fiber membrane was modified by coating polyamide acid(PA)N,N-dimethyl acetamide(DMAC) solution or PA-SiO2 particle-DMAC solution and then imidization at 300℃ or carbonization at 800 ℃.α-Al2O3hollow fiber composite membranes were prepared by dip-coating the modified membrane with polyvinyl alcohol(PVA) solution and crosslinking with glutaral(GA).The composite membranes were used in the separation of methanol-water solution by pervaporation.The effects of PVA concentration and GA concentration on the separation were investigated.The experimental results showed that the optimal conditions for the preparation of the α-Al2O3hollow fiber pervaporation composite membranes were PA-DMAC as the coating solution and then imidization,and 12%(w)PVA solution as the dip-coating solution and 6%(w) GA as the crosslinking agent.Under the conditions of 96%(w) methanol-water solution as the feedstock,temperature 40 ℃ and pressure difference 100 kPa,the permeation flux and separation factor were 15.0 g/(m2·h) and 25.0.