Abstract:In this study, poly(vinylidene fluoride-co-hexafluoropropene) (P(VDF-co-HFP)) was firstly used as a membrane material in organophilic pervporation for aroma compounds’ recovery. Separation and transport properties of P(VDF-co-HFP) coated polypropene (PP) composite membrane in pervaporation of EtAc–water mixture were investigated. The effects of two process conditions (EtAc feed concentration and operating temperature) on pervaporation parameters (permeation flux and separation factor) were discussed in detail. The study shows that acetone-fabricated membranes have excellent mechanical strength, thermal stability and film-forming properties. In addition, they have ideal pervaporation performances compared to commonly used poly(dimethylsixolane) (PDMS) membrane and poly (ether block amide) (PEBA) membrane. Its separation factor is higher than that of PEBA membrane but lower that of PDMS membrane. The permeate flux is relatively high, which depends on not only the nature of the given membrane material but also the membrane-formed special structure and morphology. Mass transports in the membrane were investigated based on the change of microstructure from DSC analysis during the swelling process. The activation energies for permeation of water (EP,W) and EtAc (EP,E) calculated from the slopes of Arrhenius plots of ln(J) versus 1/T were employed to explain the diffusion process. In general, the sorption process dominates the separation mechanism.

Pervaporation Performance Ofpoly(acrylic Acid)-Poly(vinyl Alcohol) Blend Membrane for Separation of Methanol-Dimethyl Carbonate Azeotrope

Study on Pervaporation Membranes for Removing Methanol from C 5 or Methyl Tert-butyl Ether Mixtures

A study on separation of organics by pervaporation

Separation of Dimethyl Carbonate/Methanol Mixtures by Pervaporation with Poly(Acrylic Acid)/Poly(Vinyl Alcohol) Blend Membranes

Effect of the Permeants/Polymer Interactions on the Pervaporative Separation Properties of the P(Vdf-Co-Hfp) Membrane

P(Vdf-Co-Hfp) Membrane for Recovery of Aroma Compounds from Aqueous Solutions by Pervaporation - I. Ethyl Acetate/Water System

Study on Swelling Behavior and Pervaporation Properties of AA–MMA–BA Copolymers for Separation of Methanol/mtbe/c5 Mixtures

Pervaporation Performances of Polydimethylsiloxane Membranes for Separating Dimethyl Carbonate/methanol Mixtures

Crosslinked poly(vinyl alcohol) membranes for separation of dimethyl carbonate/methanol mixtures by pervaporation

Pervaporation of methanol/MTBE/C5 ternary mixtures through the CA membrane

Recovering Ethyl Acetate from Aqueous Solution Using P(VDF-co-HFP) Membrane Based Pervaporation

Pervaporation for Separating Benzene/cyclohexane Mixture by P(AA-MA) Copolymer Membranes

Pervaporation of dimethyl carbonate/methanol mixtures through polydimethylsiloxane membranes

Pervaporation Separation of Ethanol from Aqueous Solution by PDMS Membranes Crosslinked with VTES

PPMS Composite Membranes for the Concentration of Organics from Aqueous Solutions by Pervaporation

Preparation and Pervaporation Performance of Partly Hydrolyzed Poly(vinyl Acetate) Membranes for Separating Benzene/Cyclohexane Mixtures

Silane-modified NaA/PAAs hybrid membranes for ethanol dehydration by pervaporation

Microporous Polypropylene Hollow Fiber Membranes Part Ii. Pervaporation Separation of Water/Ethanol Mixtures by the Poly(Acrylic Acid) Grafted Membranes

Vtos Cross-Linked Pdms Membranes for Recovery of Ethanol from Aqueous Solution by Pervaporation

A study on the pervaporation of water–acetic acid mixtures through ZSM-5 zeolite membranes

Preparation and pervaporation performance of PVA membrane with biomimetic modified silica nanoparticles as coating