Abstract:Membrane-based separation of organic/organic mixtures is of great importance in the chemical and petrochemical industries, but remains very challenging owing to the harsh working conditions. Herein, ultrathin and chemically stable Bis(triethoxysilyl)acetylene (BTESA)-derived organosilica membranes were reproducibly prepared, and for the first time they were utilized in the pervaporation separation of methanol/organic azeotropes. The as-prepared BTESA membranes exhibited exceptional pervaporation performance in a 10 wt%/90 wt% methanol/dimethyl carbonate (DMC) mixture, and showed a high separation factor of approximately 120 with a permeation flux of 2–4 kg m-2 h-1 at 50 °C. This impressive performance was primarily the result of the preferential sorption of methanol and the efficient size sieving of DMC. In addition, the effects of feed concentration and temperature on methanol/DMC pervaporation performance were thoroughly investigated. Importantly, a generalized solution-diffusion model successfully described the pervaporation performance of BTESA membranes, and the usefulness of this model was further confirmed via the pervaporation of methanol/methyl acetate and methanol/methyl tert-butyl ether (MTBE) mixtures. This work demonstrates the great potential of organosilica membranes for high-performance organic/organic pervaporation.

Pervaporation of methanol/MTBE/C5 ternary mixtures through the CA membrane

Study on Pervaporation Membranes for Removing Methanol from C 5 or Methyl Tert-butyl Ether Mixtures

Hybrid process of distillation side-connected with pervaporation for separation of methanol/MTBE/C4 mixture

A study on separation of organics by pervaporation

Study on Swelling Behavior and Pervaporation Properties of AA–MMA–BA Copolymers for Separation of Methanol/mtbe/c5 Mixtures

Influence of Operating Conditions on the Hybrid Separation Process Used for C4 Etherified Products

Influence of Viscosity Slope Coefficient of CA and Its Blends in Dilute Solutions on Permeation Flux of Their Films for MeOH/MTBE Mixture

Effect of the Permeants/Polymer Interactions on the Pervaporative Separation Properties of the P(Vdf-Co-Hfp) Membrane

A Triacetate Cellulose Membrane for the Separation of Methyl Tert-Butyl Ether/Methanol Mixtures by Pervaporation

DESIGN OF INTEGRATED PROCESS OF DISTLLIATION AND PERVAPORATION FOR THE SEPARATION OF MTBE-C4-METHANOL MIXTURE

Effect of Pervaporation Module Structure on Separation Performance

Pervaporation Separation of Ethanol from Aqueous Solution by PDMS Membranes Crosslinked with VTES

Preparation of Cellulose Acetate Membrane Filled with Metal Oxide Particles for the Pervaporation Separation of Methanol/methyl Tert-Butyl Ether Mixtures

Influence of the Dilute‐solution Properties of Cellulose Acetate in Solvent Mixtures on the Morphology and Pervaporation Performance of Their Membranes

Pervaporation removal of methanol from methanol/organic azeotropes using organosilica membranes: Experimental and modeling

Separation of methanol–benzene and methanol–toluene mixtures by pervaporation: effects of thermodynamics and structural phenomenon

Pervaporation of dimethyl carbonate/methanol mixtures through polydimethylsiloxane membranes

PPMS Composite Membranes for the Concentration of Organics from Aqueous Solutions by Pervaporation

Pervaporation Separation of Methanol/Methyl T-Butyl Ether Through Chitosan Composite Membrane Modified with Surfactants

Pervaporation Recovery of Acetone-Butanol from Aqueous Solution and Fermentation Broth Using Htpb-Based Polyurethaneurea Membranes

Separation of Dimethyl Carbonate/Methanol Mixtures by Pervaporation with Poly(Acrylic Acid)/Poly(Vinyl Alcohol) Blend Membranes