PFSA-TiO 2 (or Al 2 O 3 )-PVA/PVA/PAN difunctional hollow fiber composite membranes prepared by dip-coating method

Xiao-Hua Ma,Zhen-Liang Xu,Fan Wu,Hai-Tao Xu
DOI: https://doi.org/10.1007/s13726-011-0007-9
2012-01-01
Iranian Polymer Journal (English Edition)
Abstract:PFSA-TiO 2 (or Al 2 O 3 )-PVA/PVA/PAN difunctional hollow fiber composite membranes with separation performance and catalytic activity have been prepared by dip-coating method. The good separation performance was brought about by the glutaraldehyde (GA) surface cross-linked PVA/PAN composite membrane, and the good catalytic activity of the membrane was achieved by the perfluorosulphonic acid (PFSA) used. The difunctional hollow fiber membranes were characterized by XRD, TGA, EDX, SEM, and FTIR. The separation performance was measured by dehydration of azeotropic top product of ethanol-acetic acid esterification, and the catalytic activity was obtained by investigating the esterification of ethanol and acetic acid. The FTIR spectra and the morphologies of difunctional hollow fiber composite membranes were similar for samples prior to esterification and post-esterification with ethanol and acetic acid for 24 h. Difunctional hollow fiber composite membranes with 2% PFSA, 8% TiO 2 (named as DM-T1), and 2% PFSA, 8% Al 2 O 3 (named as DM-A1) (all by weights) showed the best catalytic activity. They displayed fluxes of 165 and 173 g/m 2 h, separation factors of water to ethanol of 279 and 161, PFSA contents in difunctional hollow fiber composite membrane of 3.2 and 2.4%, the ratios of PFSA to feed solution (acetic acid–ethanol) of 0.031 and 0.023%, and the equilibrium conversion of ethanol at 53.5 and 57.6%, in the given order for TiO 2 and Al 2 O 3 containing samples.
What problem does this paper attempt to address?