Preparation and characterization of poly (vinylidene fluoride)/TiO 2 hybrid membranes

Weiying Li,Xiuli Sun,Chen Wen,Hui Lu,Zhiwei Wang

DOI: https://doi.org/10.1007/s11783-012-0407-x

IF: 6.048

2012-01-01

Frontiers of Environmental Science & Engineering

Abstract:Poly(vinylidene fluoride) (PVDF)/titanium dioxide (TiO 2 ) hybrid membranes were prepared using nano-TiO 2 as the modifier, and characterized by Transmission Electron Microscope (TEM), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), atomic force microscope (AFM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The characterization results demonstrated that nano-sized TiO 2 particles dispersed homogeneously within the PVDF matrix, contributing to more hydroxyls and smoother surfaces. Moreover, permeate flux, retention factor, porosity, contact angle and anti-fouling tests were carried out to evaluate the effect of TiO 2 concentration on the performance of PVDF membranes. Among all the prepared membranes, PVDF/TiO 2 membrane containing 10 vol.% TiO 2 exhibited the best hydrophilicity with an average pure water flux up to 237 L·m −2 ·h −1 , higher than that of unmodified PVDF membranes (155 L·m −2 ·h −1 ). Besides, the bovine serum albumin rejection of the hybrid membrane was improved evidently from 52.3% to 70.6%, and the contact angle was significantly lowered from 83° to 60°, while the average pore size and its distribution became smaller and narrower.