Abstract:Composite mechanical joints are extensively used and becoming crucial components for primary and secondary structures in industry. Considerable efforts have been contributed to the failure behavior of resin matrix laminate composite bolt joint, but few ones refer to carbon matrix woven composites. In current work, a comprehensive experimental and numerical research on the failure behavior for satin woven carbon/carbon composites under pin-loading, which is the typical loading case for mechanical joint, was presented. Seven types of specimens with different configuration were tested to evaluate the influence of the geometry on the failure modes. The testing results stated that, with the increasing of width-to-hole diameter ratio (W/D) and edge distance-to-hole diameter ratio (E/D), the net tension and shear out failure transformed into the bearing failure respectively, while hole diameter-to-thickness ratio (D/t) hardly affect the failure mode. For a further exploration for damage mechanism of the acceptable bearing failure in engineering, damage accumulation and evolution were assessed combining numerical simulation and acoustic emission monitoring. In view of the complexity of satin woven framework, the hierarchical multiscale numerical strategy from micro-to macro-level was proposed to obtain the material mechanical performance. In order to acquire reliable prediction and consider the effects of the uncertainty sources on composite properties, the model geometry reconstruction was performed using X-ray tomography. Meanwhile, the fiber and void random distributions were determined via the Random Sequential Adsorption algorithm. The Murakami-Ohno damage theory was adopted to characterize the damage propagation. It is concluded that, the numerical prediction agreed with the testing results reasonably well, and the main damage mechanism during the bearing failure included matrix cracking, yarns pulling-out and yarns fracture matching various amplitude ranges of acoustic emission signals.

On the Static/Dynamic Mechanical Properties and Constitutive Relation of Bi-stratal Multifunction Cloth

Mechanical properties analysis of architectural PVDF/PES fabrics with uni-tensile and bi-axial test

Size-dependent mechanical behaviors of 3D woven composite under high strain-rate compression loads

Mechanical Behavior and Failure Mode of Woven Carbon/epoxy Laminate Composites under Dynamic Compressive Loading

A Dynamic Constitutive Model and Simulation of Braided CFRP under High-Speed Tensile Loading

Experimental investigation on the effects of fabric architectures on mechanical and damage behaviors of carbon/epoxy woven composites

Comparative studies on the effect of fabric structure on mechanical properties of carbon fiber/epoxy composites

An Experiment Study on the Failure Mechanisms of Woven Textile Sandwich Panels under Quasi-Static Loading

Theoretical prediction for effective properties and progressive failure of textile composites: a generalized multi-scale approach

Experimental investigation on mechanical response and failure analysis of 3D multi-axial warp knitted hybrid composites

Experimental Study on the Mechanical Behavior and Failure Mechanism of 3d MWK Carbon/epoxy Composites under Quasi-Static Loading

Effects of fabric architectures on mechanical and damage behaviors in carbon/epoxy woven composites under multiaxial stress states

Dynamic Compressive Response and Failure Behaviour of CFRP Composites at High Strain Rates

Tensile properties of multilayered biaxial weft knitted fabric reinforced composite material

Dynamic Anti-Crushing Behaviors of Woven Textile Sandwich Composites: Multilayer and Gradient Effects

Flexural Failure Mechanisms of Three-Dimensional Woven Textile Sandwich Panels: Experiments

Anisotropic failure analysis of 2.5-D braided composites under compression

Multiaxial failure mechanism of 3D triple-twill warp-lining woven composites

Biaxial tensile failure of short carbon-fibre-reinforced PEEK composites

Strain Rate and Temperature Effect on Mechanical Properties and Failure of 3D Needle-Punched Carbon/Carbon Composites under Dynamic Loading

Experimental and Multiscale Numerical Investigation on Failure Behavior of Satin Woven Carbon/carbon Composites Subjected to Pin-Loading