Abstract:An engineering project of the super-long rock-socketed bored piles crossing a huge thick gravel layer with about 40 m depth was conducted at a 350 m high-rise building in Wenzhou area. The selection of drilling machine,the drilling method in different soil layers,the construction technology in crossing a huge thick gravel layer,the preparation of mud and the bore hole cleaning technology were presented to discuss details of the construction technology of the over 100-meter super-long bored piles. Moreover,the pile diameter and the ultrasound test were used to analyze the quality of drilled hole and pile shaft,respectively. In addition,a large tonnage static load test was conducted to capture the bearing capacity and the settlement of test pile. Some key findings indicate that the varying drilling processes,the high quality mud and the variable drilling methods can be adopted in different soil layers during the construction of the super-long bored piles. During a super-long pile construction in a gravel layer,the mud leakage and the borehole collapse can be solved by adjusting the property of mud,whereas the bits with variable diameter and the pump suction reverse circulation drilling can be adopted to improve the drilling efficiency. The static load test shows that the percentage of the super-long pile settlement at the pile head caused by the pile compression is over 90% within the working load. It can also be concluded that the thickness of the sediments at the pile end has an influence on the settlement of the super-long pile.

Factors influencing the quality of cast-in-place bored pile

The Principle of Pile-soil Interaction Applied to Reinforce Pile Accident

Experimental Analysis of Bearing Capacity of Cast-in-place Tubular Pile

Construction Techniques for Reinforcement of Foundation of Existing Bridge Pile with Microsteel-Piped Pile

Review on Pile Quality Accident

Study on Rigid-flexible Piles Composite Foundation with Worse Quality

Performance analysis of cast-in-place tubular pile composite ground under embankment load

STUDY ON SINGLE RIGID PILE GROUND IMPROVEMENT MODEL UNDER EMBANKMENT

In-situ Experiment on Urban Road Subgrade Improved by Plain Concrete Pile and Mixed-in-place Pile

STUDY ON VERTICAL BEARING CAPACITY OF LARGE-DIAMETER CAST-IN-SITU THIN-WALL TUBULAR PILE

Analysis of cast-in-situ tubular piles in soft foundation improvement at bridge approaches

Study On Characteristics Comparison Between Rigid Pile In Composite Foundation With Rigid-Flexible Piles And That In Free State

Hole-drilled bored pile cause analysis of quality accident and reinforcement treatments

Study on Quality Control Measures of Bored Pile in Highway Bridge Construction

Probe into Technical Factors Influenced Pile Forming Quality of Drilling Injection Pile

CONSTRUCTION TECHNOLOGY AND PILE QUALITY ANALYSIS OF SUPER-LONG ROCK-SOCKETED PILE CROSSING A HUGE-THICK GRAVEL LAYER

Quality Control for Fabricating Large Diameter Bored Piles in Collapsible Sand Layer Areas

Study on Axial Bearing Properties of Cast-in-place Concrete Thin-Wall Tubular Piles

The engineering characteristic of precast tubular pile and mixing cement pile composite foundation for deep soft ground

Field Test on the Influence of the Cemented Soil Around the Pile on the Lateral Bearing Capacity of Pile Foundation

Influence Of Excavation Unloading On Vertical Bearing Behavior Of Existing Pile Groups