Abstract:An engineering project of the super-long rock-socketed bored piles crossing a huge thick gravel layer with about 40 m depth was conducted at a 350 m high-rise building in Wenzhou area. The selection of drilling machine,the drilling method in different soil layers,the construction technology in crossing a huge thick gravel layer,the preparation of mud and the bore hole cleaning technology were presented to discuss details of the construction technology of the over 100-meter super-long bored piles. Moreover,the pile diameter and the ultrasound test were used to analyze the quality of drilled hole and pile shaft,respectively. In addition,a large tonnage static load test was conducted to capture the bearing capacity and the settlement of test pile. Some key findings indicate that the varying drilling processes,the high quality mud and the variable drilling methods can be adopted in different soil layers during the construction of the super-long bored piles. During a super-long pile construction in a gravel layer,the mud leakage and the borehole collapse can be solved by adjusting the property of mud,whereas the bits with variable diameter and the pump suction reverse circulation drilling can be adopted to improve the drilling efficiency. The static load test shows that the percentage of the super-long pile settlement at the pile head caused by the pile compression is over 90% within the working load. It can also be concluded that the thickness of the sediments at the pile end has an influence on the settlement of the super-long pile.

Hole-drilled bored pile cause analysis of quality accident and reinforcement treatments

Pile-Planting Construction Method of Concrete-Filled Steel Pipe Piles of Qiandao Lake Bridge

Construction Techniques for Reinforcement of Foundation of Existing Bridge Pile with Microsteel-Piped Pile

The Principle of Pile-soil Interaction Applied to Reinforce Pile Accident

Review on Pile Quality Accident

Experimental Analysis of Bearing Capacity of Cast-in-place Tubular Pile

TRIAXIAL MIXED PILE JOINT DEWATERING METHOD FOR CONSTRUCTION OF PASSAGE CONNECTING TUNNELS

STUDY ON VERTICAL BEARING CAPACITY OF LARGE-DIAMETER CAST-IN-SITU THIN-WALL TUBULAR PILE

Factors influencing the quality of cast-in-place bored pile

CONSTRUCTION TECHNOLOGY AND PILE QUALITY ANALYSIS OF SUPER-LONG ROCK-SOCKETED PILE CROSSING A HUGE-THICK GRAVEL LAYER

Quality Control for Fabricating Large Diameter Bored Piles in Collapsible Sand Layer Areas

Example Analysis Of Sloping And Floating Upward Prestressed Pipe Pile With Treatment Of A High-Rise Building In Zhejiang Province

Field Tests and Simplified Calculation Method for Static Drill Rooted Nodular Pile

STUDY OF BLOCKAGE ACCIDENT OF PRE-EMBEDMENT GROUTING PIPES AND ITS CORRESPONDING TREATMENT METHOD

The common problems and the prevention measures in the hole-making of hole-drilled bored pile

Field test and numerical analysis of transversal dynamic characteristics of pile groins due to tidal bores

Field Behavior of Driven Prestressed High-Strength Concrete Piles in Sandy Soils

Study on construction technology of percussive reverse circulation drilling hole forming squeezed branch pile

Observed Performance of a Deep Multistrutted Excavation in Hangzhou Soft Clays with High Confined Water

A Simplified Nonlinear Calculation Method to Describe the Settlement of Pre-Bored Grouting Planted Nodular Piles

APPLICATION OF STATIC BOLT-PRESSING PILES IN REINFORCEMENT AND RECTIFICATION OF CONSTRUCTIONS