Abstract:Phase plates (PPs) in transmission electron microscopy (TEM) improve the contrast of weakly scattering objects under in-focus imaging conditions. A well-established PP type is the Zernike (Z)PP, which consists of a thin amorphous carbon (aC) film with a microscaled hole in the centre. The mean inner potential of the aC film is exploited to shift the phase of the scattered electrons while the unscattered electrons in the zero-order beam propagate through the hole and remain unaffected. However, the abrupt thickness increase at the hole edge induces an abrupt change of the phase-shift distribution and leads to fringing, that is, intensity oscillations around imaged objects, in TEM images. In this work, we have used focused-ion-beam milling to fabricate ZPPs with abrupt and graded thickness profiles around the centre hole. Depending on the thickness gradient and inner hole radius, graded-ZPP-TEM images of an aC/vacuum interface and bundles of carbon nanotubes (CNTs) show strongly reduced fringing. Image simulations were performed with ZPP-phase-shift distributions derived from measured thickness profiles of graded ZPPs, which show good agreement with the experimental images. Fringing artefacts, that is, intensity oscillations around imaged objects, are strongly reduced for Zernike phase plates with a graded thickness profile around the centre hole. Focused-ion-beam milling is used to fabricate graded Zernike phase plates with specific inner hole radius and thickness gradients. The phase-shift distribution is obtained from measured thickness profiles around the centre hole. Image simulations based on experimentally measured thickness/phase-shift distributions show good agreement with experimental Zernike phase-plate TEM images.

The Fabrication and Application of Zernike Electrostatic Phase Plate.

Carbon-film-based Zernike phase plates with smooth thickness gradient for phase-contrast transmission electron microscopy with reduced fringing artefacts

Direct Measurement of Electrostatic Fields Within the Zernike Electrostatic Phase Plate Using Single 155 Nm Teflon Nanoparticle Attached to the Pillar-Shaped Atomic Force Microscope Tip

On-Chip Thin Film Zernike Phase Plate for In-Focus Transmission Electron Microscopy Imaging of Organic Materials

Precisely-controlled Fabrication of Single ZnO Nanoemitter Arrays and Their Possible Application in Low Energy Parallel Electron Beam Exposure.

Towards an optimum design for electrostatic phase plates

Nanostructured-membrane electron phase plates

Thin-film based phase plates for transmission electron microscopy fabricated from metallic glasses

New materials for thin-film phase-plates

Fresnel Zone-Plate Based X-Ray Microscopy In Zernike Phase Contrast With Sub-50 Nm Resolution At Nsrl

Characterization of Cubic Phase MgZnO/Si(100) Interfaces

Phase TEM for Biological Imaging Utilizing a Boersch Electrostatic Phase Plate: Theory and Practice

Characterisation of Ferromagnetic Rings for Zernike Phase Plates using the Aharonov-Bohm effect

Imaging of weak phase objects with a Zernike phase plate

Large-Scale High-Accuracy and High-Efficiency Phase Plate Machining

A Compound Kinoform/Fresnel Zone Plate Lens with 15 Nm Resolution and High Efficiency in Soft X-Ray.

Simulation of an X-ray Fresnel Zone Plate with Nonideal Factors

Quantum Wavefront Shaping with a 48-element Programmable Phase Plate for Electrons

Direct-writing Electric-Controlled Micro Fresnel Zone Plate with Ferroelectric Domain In-Version

π-phase modulated monolayer supercritical lens

A Laser Phase Plate for Transmission Electron Microscopy