Abstract:Cu6Sn5 and Cu3Sn are important intermetallic compounds, greatly influencing the reliability of the Sn-Cu solder system. Micro-alloying Ni has been proved to be effective in suppressing Cu3Sn, but its influence on the formation of Cu6Sn5 is still unclear. In this paper, the nucleation and growth behavior of Cu6Sn5 in Sn-8.5Cu-xNi (x = 0, 0.05, 0.1, 0.5, 1) alloys are in situ investigated using synchrotron X-ray radiography, X-ray diffraction, and electron probe micro-analyzer. The results show that Ni can significantly increase the nucleation temperature of (Cu, Ni)6Sn5 since (Cu, Ni)6Sn5 has a more negative heat of formation. When Ni ≥ 0.05 wt%, the nucleation temperature of (Cu, Ni)6Sn5 will be higher than that of Cu3Sn. As a result, the peritectic reaction Cu3Sn + L → Cu6Sn5 doesn't occur and instead (Cu, Ni)6Sn5 nucleates from the melt before cooling down to the nucleation temperature of Cu3Sn. During the nucleation and growth of (Cu, Ni)6Sn5, Ni-rich clusters preferentially form stable crystal nuclei, and then low Ni parts grow on them. Raising Ni content increases the number of Ni-rich clusters, so the grain density of (Cu, Ni)6Sn5 increases with Ni addition. With the growth of (Cu, Ni)6Sn5, some Ni-rich clusters are in contact with (Cu, Ni)6Sn5-liquid interface and promote the rapid growth of (Cu, Ni)6Sn5 around the newly formed Ni-rich region. The excessively enlarged parts break down at the weak points because of gravity, further refine the grain. The results based on this study provide an opportunity to optimize the structure of Cu6Sn5 in the Sn-Cu system.

Effect of Sn addition on the glass-forming ability in (Cu40Ti30Ni15Zr10)(100-x)/95Snx (x = 0, 2, 4, 6 and 8) alloys

A New Ti–Zr–Hf–Cu–Ni–Si–Sn Bulk Amorphous Alloy with High Glass-Forming Ability

Preparation of (ti0.45cu0.378zr0.10ni0.072)100−xsnx Bulk Metallic Glasses

Effect of Sn on Glass Formation Ability and Crystallization Behaviors of Cu-Based Bulk Metallic Glass Alloy

Effect of Sn Addition on the Microstructure and Mechanical Properties of AZ31 Alloys

Cu-alloying Effect on Crystallization Kinetics of Ti41Zr25Be28Fe6 Bulk Metallic Glass

Effects of Ga,In additions of the Glass Forming Ability of Fe40Ni40P14B6 Eutectic Alloy

Effect of Co Addition on the Glass-Forming Ability and Mechanical Properties of Ti-Zr-Be-Cu-Co Bulk Amorphous Alloys

Effect of Sn content on microstructure and tensile properties of as-cast and as-extruded Mg−8Li−3Al−(1,2,3)Sn alloys

Effect of Mg2sn Intermetallic on the Grain Refinement in As-Cast Am Series Alloy

Effect of Sn on Plastic Deformation Ability of Fe–Si–B–P–Sn bulk Metallic Glasses

Influence of Substitution of Cu by Ni on the Crystallization Kinetics of TiZrHfBeCu High Entropy Bulk Metallic Glass

Mechanism of Ag and Al on improving the glass forming ability of CuZr-based alloys

Effects of Alloying Elements on Crystallization Kinetics of Ti–Zr–Be Bulk Metallic Glass

Effect of Ti addition on properties of Zr54Al10.2Ni9.4Cu26.4 glass forming alloy

The role of Sn element on the deformation mechanism and precipitation behavior of the Al–Cu–Mg alloy

Effect of Chemical Composition on the Thermoplastic Formability and Nanoindentation of Ti-Based Bulk Metallic Glasses

The effect of minor alloying on the glass forming ability and crystallization reaction of Ti32.8Zr30.2Cu9M5.3Be22.7 (M=Fe, Co, and Ni) bulk metallic glass

Development and characterization of novel Mg-6Zn-0.6Si- x Sn alloys with varying Sn addition

Improving the Mechanical Properties and Intergranular Corrosion Resistance of Al-9.2Mg-0.8Mn-0.2Zr Alloy by Sn Addition

Effects of Ni on the nucleation and growth behavior of Cu6Sn5 in Sn–8.5Cu alloy: An in situ observation