Abstract:Rod-like silicates (attapulgite, ATT) with covalently grafted polymer chains chemically identical to the matrix were incorporated into polyimide films, which resulted in prominent improvements in strength and toughness and elevation as high as 51 degrees C of the thermal decomposition temperature. The dispersion uniformity of ATT nanorods in the polyimide was confirmed by SEM observations and UV-vis spectra. High grafting efficiency of the polymer on the particle surface significantly confines the segmental motion of the polyimide, causing a 33 degrees C increase in the glass transition temperature and remarkable broadening in the primary transition of nanocomposite films. The decreases in strength and toughness of the samples with high particle contents indicate that there are other factors impacting the mechanical properties of nanocomposites, besides percolated particle networks and attractive interfacial interactions. The plastic deformation observed on the fracture surface of nanocomposites suggests that the introduction of free volume, due to the exclusive volume effect of particles and polymer chains, might play a crucial role especially for those samples with high particle contents. Some fundamental facts based on the free volume effect are proposed to elucidate the possible reasons why the strength and toughness of nanocomposites decrease at high particle contents, which implies that there probably exists a limit upon simultaneously reinforcing and toughening a polymer matrix by means of adding nanoparticles. Similarly, such a limit probably impairs the improvement in thermal stability of nanocomposites at high particle contents, although the segmental confinement effect and porous feature of rod-like silicates have led to pronounced improvements in the thermal stability of the polyimide.

STUDY ON PROPERTIES AND PREPARATION OF POLYAMIDE 66/ATTAPULGITE NANOCOMPOSITES

Preparation and Rheology of Polyamide-6/Attapulgite Nanocomposites and Studies on Their Percolated Structure

Preparation and Properties of Polyamide 66/organo‐vermiculite Nanocomposites

Preparation and properties of polypropylene/org-attapulgite nanocomposites

Nylon 66/clay nanocomposite structure development in a twin screw extruder

Preparation and characterization of polyimide/attapulgite nanocomposites

Effect of Dendrimer‐like PAMAM Grafted Attapulgite on the Microstructure and Morphology of Nylon‐6

COMPARISON OF POLYAMIDE 66/MONTMORILLONITE NANOCOMPOSITES PREPARED FROM POLYAMIDE 6 AND POLYAMIDE 66 BASED MASTER-BATCHES

MICROSCOPIC STRUCTURE AND MECHANICAL PROPERTIES OF POLYLACTIDE/ATTAPULGITE NANOCOMPOSITES

Preparation of Poly(Phenylene Oxide)/Polyamide-6 Nanocomposites with High Tensile Strength and Excellent Impact Performance

Improve the thermal and mechanical properties of poly(L-lactide) by forming nanocomposites with pristine vermiculite

A study on attapulgite reinforced PA6 composites

PROPERTY AND MICROSTRUCTURE OF POLY(ETHYL TEREPHTHALATE)/NANO ATTAPULGITE MASTER BATCH COMPOSITES

Poly(Ethylene Terephthalate)/Attapulgite Nanocomposites: Preparation, Structure, and Properties

Morphology and Properties of PA6/Attupulgite Nano-composites

Research Progress of Polymer/Attapulgite Nanocomposites

Isothermal crystallization kinetics and mechanical properties of poly(butylene terephthalate)/attapulgite nanocomposites

Rod-Like Attapulgite/Polyimide Nanocomposites with Simultaneously Improved Strength, Toughness, Thermal Stability and Related Mechanisms

Additive Manufacturing of Polyamide 66: Effect of Process Parameters on Crystallinity and Mechanical Properties

Preparation and Characterization of Polyamide 66/montmorillonite Nanocomposites with Methyl Methacrylate As Cointercalation Agent

Preparation and properties of polyamide 6/halloysite nanotubes nanocomposites