Abstract:Neat polyimide films are known to be dense and rigid. They are therefore not suitable for use in membranes, sensors and sustainable energy storage applications. In this study, a novel technique has been used to simultaneously improve the porosity, rigidity, damping ability and impact resistance of polyimide membranes. It is demonstrated that dispersion of a small amount of polyaniline copolymer-modified clay of about 0.25-0.5 wt.% into the polyimide matrix resulted in an enhanced storage modulus while maintaining high damping ability and glass transition temperature, Tg. Novel polyimide/substituted polyaniline-copolymer-clay nanocomposite membranes containing poly(N-ethyl-aniline-co-aniline-2-sulfonic-acid)-modified-clay (SPNEAC) was successfully prepared and incorporated into the polyimide matrix to form modified clay/polyimide nanocomposites. UV-Vis analysis of the nanocomposite films shows that the optical transparency of the SPNEAC-PI nanocomposite membranes decreased with increasing SPNEAC concentration due to the high UV-Vis absorption of SPNEAC. Transmittance of about 3% was observed in the nanocomposite membrane containing 5 wt.% modified clay at 500 nm wavelength, which is significantly lower than that for the neat PI membrane of about 36%. The dispersion of SPNEAC containing a high concentration of clay (≥40 wt.% clay), in polyimide matrix, resulted in the attainment of a higher degree of imidization than was possible for the organoclay/polyimide nanocomposite. This behavior is believed to be due to the synergistic interaction between PI and SPNEAC. A correlation of the morphology and elastic modulus of the SPNEAC2/PI nanocomposites shows that at low loading of SPNEAC 2 ≤ 0.5 wt.%, the cross-sectional morphology of the composite is an open, spiky, weblike structure with a storage modulus of about 1 GPa, but it progressively evolves into densely packed microspheroids with storage moduli of ≥2 GPa at 10 wt.% SPNEAC2. The impact energy of SPNEAC/PI composites, calculated from the α-transition peak area, increased with increasing SPNEAC loading and were about 4 times that of neat PI at 10 wt.% SPNEAC.

Rod-Like Attapulgite/Polyimide Nanocomposites with Simultaneously Improved Strength, Toughness, Thermal Stability and Related Mechanisms

Effective Enhancement of a Carbon Nanothread on the Mechanical Properties of the Polyethylene Nanocomposite

New Reactive Rigid-Rod Aminated Aromatic Polyamide for the Simultaneous Strengthening and Toughening of Epoxy Resin and Carbon Fiber/epoxy Composites

Molecular-level Dispersion of Rigid-Rod Sulfonated Aromatic Polyamides in Epoxy Resin for Extraordinary Improvement in Both Strength and Toughness

Preparation and Dielectric Properties of Polyimide/silica Nanocomposite Films Prepared from Sol–gel and Blending Process

Polyhedral oligosilsesquioxane-modified boron nitride enhances the mechanical properties of polyimide nanocomposites

MICROSCOPIC STRUCTURE AND MECHANICAL PROPERTIES OF POLYLACTIDE/ATTAPULGITE NANOCOMPOSITES

Hybrid Network Structure And Mechanical Properties Of Rodlike Silicate/Cyanate Ester Nanocomposites

Dramatic Enhancements In Toughness Of Polyimide Nanocomposite Via Long-Cnt-Induced Long-Range Creep

Preparation of Poly(Phenylene Oxide)/Polyamide-6 Nanocomposites with High Tensile Strength and Excellent Impact Performance

Preparation and characterization of polyimide/attapulgite nanocomposites

Fabrication of High Impact-Resistant Polyimide Nanocomposites with Outstanding Thermomechanical Properties

High-Impact Performance and Thermal Properties of Polyimine Nanocomposites Reinforced by Silicon Carbide Nano-Whiskers

Preparation and Rheology of Polyamide-6/Attapulgite Nanocomposites and Studies on Their Percolated Structure

Polyimide-based composites reinforced by carbon nanotube-grafted carbon fiber for improved thermal conductivity and mechanical property

Improving the Dielectric Constants and Breakdown Strength of Polymer Composites: Effects of the Shape of the Batio3 Nanoinclusions, Surface Modification and Polymer Matrix

Fabricating super tough polylactic acid based composites by interfacial compatibilization of imidazolium polyurethane modified carbon nanotubes

Synergistic toughening of thermoplastic particles-inorganic particles to carbon fiber reinforced epoxy resin composites

Isothermal Crystallization Kinetics of Poly(butylene Terephthalate)/attapulgite Nanocomposites

Synthesis and properties of the amino-functionalized multiple-walled carbon nanotubes/polyimide nanocomposites

Preparation and characterization of crystalline poly(L‐lactic acid)/silica nanocomposite films with high ductility and gas barrier properties