Abstract:Rod-like silicates (attapulgite, ATT) with covalently grafted polymer chains chemically identical to the matrix were incorporated into polyimide films, which resulted in prominent improvements in strength and toughness and elevation as high as 51 degrees C of the thermal decomposition temperature. The dispersion uniformity of ATT nanorods in the polyimide was confirmed by SEM observations and UV-vis spectra. High grafting efficiency of the polymer on the particle surface significantly confines the segmental motion of the polyimide, causing a 33 degrees C increase in the glass transition temperature and remarkable broadening in the primary transition of nanocomposite films. The decreases in strength and toughness of the samples with high particle contents indicate that there are other factors impacting the mechanical properties of nanocomposites, besides percolated particle networks and attractive interfacial interactions. The plastic deformation observed on the fracture surface of nanocomposites suggests that the introduction of free volume, due to the exclusive volume effect of particles and polymer chains, might play a crucial role especially for those samples with high particle contents. Some fundamental facts based on the free volume effect are proposed to elucidate the possible reasons why the strength and toughness of nanocomposites decrease at high particle contents, which implies that there probably exists a limit upon simultaneously reinforcing and toughening a polymer matrix by means of adding nanoparticles. Similarly, such a limit probably impairs the improvement in thermal stability of nanocomposites at high particle contents, although the segmental confinement effect and porous feature of rod-like silicates have led to pronounced improvements in the thermal stability of the polyimide.

Preparation and characterization of polyimide/attapulgite nanocomposites

Preparation and imidization of polyimide composites filled with boron nitride

Preparation and Properties of Polyurethane/Montmorillonite Nanocomposites Cured under Room Temperature

PREPARATION AND STUDY ON STRUCTURE OF THE POLYIMIDE/SILICA HYBRID AND NANOCOMPOSITE FILMS

Preparation and Dielectric Properties of Polyimide/silica Nanocomposite Films Prepared from Sol–gel and Blending Process

Preparation and Rheology of Polyamide-6/Attapulgite Nanocomposites and Studies on Their Percolated Structure

Synthesis of poly(propylene glycol)-grafted polyimide precursors and preparation of nanoporous polyimides

STUDY ON PROPERTIES AND PREPARATION OF POLYAMIDE 66/ATTAPULGITE NANOCOMPOSITES

Preparation and properties of polypropylene/org-attapulgite nanocomposites

Rod-Like Attapulgite/Polyimide Nanocomposites with Simultaneously Improved Strength, Toughness, Thermal Stability and Related Mechanisms

Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation

Preparation and Characterization of Polyimide / ZnAl Layered Double Hydroxide Nanocomposites

Preparation of O-cresol Formaldehyde Epoxy Resin/Attapulgite Nanocomposites by Melt Polymerization

Thermal and dynamic mechanical properties of attapulgite reinforced poly(butylene succinate-co-1,2- octanediol succinate) nanocomposites

Polyimide/montmorillonite nanocomposites based on thermally stable, rigid-rod aromatic amine modifiers

Preparation of Poly(Phenylene Oxide)/Polyamide-6 Nanocomposites with High Tensile Strength and Excellent Impact Performance

The synthesis and characterization of polyurethane/clay nanocomposites

Preparation and characterization of nanocomposite polyurethane.

Synthesis and Characterization of Polyurethane/Montmorillonite Nanocomposites by in Situ Polymerization

Preparation and Properties of the Polyimide/multi-Walled Carbon Nanotubes (mwnts) Nanocomposites

Investigation Into Poly(propylene)/Montmorillonite/Calcium Carbonate Nanocomposites